@ikir

mmm.. you must explain me this.. in details..

_________________
My site http://www.amigasoft.net

@hotrod

ahi use another method to play audio. Indeed you cannot play another file when using ahi mode. If you use ahi_dev you can mix two audio stream.

_________________
My site http://www.amigasoft.net

@spotUP

Just got subtitles to work yesterday. Download font files from here:

http://www.mplayerhq.hu/homepage/design7/dload.html

Extract desired font-files to /conf/font/ and everything should work, including OSD.

Edit: oh yeah, forgot to add that mplayer seems to have problems with subtitle filenames with spaces on them.

Last edited by densho on 08-Feb-2005 at 12:40 PM.

_________________
OS4.1 on mA1/G3, 256MB, 160GB, DVD-RW, 19"TFT, SilverStone LC05 | iBook G4 | PC | X360 | Xbox | Wii | Dingoo A-320

@afxgroup

vcore problems happens usually when you use 100% cpu. probably your vcore is lower than one needed by the cpu. A lot of 933 version shipped with wrong vcore!

I have a G41000 and i needed to upper vcore alittle to have my system rock stable stable.
I use mine to 1,74. Probably your is 1,59 for 800Mhz G4. Most users have 1,64 for their 933 G4.
IT DOESN'T matter if Linux is stable or not.

_________________
AmigaNews.it

@afxgroup

Read about it in the article on intuitionbase.com (in the VCORE paragraph):

http://intuitionbase.com/static.php?section=notes

Varthall

_________________
AmigaOne XE - AmigaOS 4.1
Freescale 7457 1GHz - 1GB ram
Radeon 9200 256MB
Soundblaster PCI128

@Varthall

i've changed the vcore to 1.79. i'll test it tonight.

_________________
My site http://www.amigasoft.net

@ikir

Quote:

I have a G41000 and i needed to upper vcore alittle to have my system rock stable stable. I use mine to 1,74. Probably your is 1,59 for 800Mhz G4. Most users have 1,64 for their 933 G4. IT DOESN'T matter if Linux is stable or not.

Warning:

YOU CANNOT DETERMINE YOUR CORRECT VCORE UNLESS YOU KNOW THE CORRECT PART NUMBER OF YOUR CPU

(damn, this should have appeard in big red letters!)

Read this before doing any adjustments.

Once again I need to point out that there is none other than 800 Mhz G4 systems availabel. THERE IS NO 933. The CPU might be a 933 MHz CPU, but there is no guarantee that the rest of the system is built in such a way that it can use another frequency.

Apparently, this hasn't filtered in yet, so please forgive my shouting, but I think that it is better to be yelled at than to fry your CPU.

_________________
hippopotomonstrosesquipedaliophobia
The fear of long words

FriedenHQ - my personal website
The Way Inn - our Neverwinter Nights server

@afxgroup

Quote:

i've changed the vcore to 1.79. i'll test it tonight.

Don't!!!

You MUST read your CPU's PART NUMBER and look it up in the Freescale manuals to determine the correct VCORE for your CPU. DO NOT SIMPLY CHANGE IT. There is NO guarantee that it will work, and in the worst case it may fry your machine.

_________________
hippopotomonstrosesquipedaliophobia
The fear of long words

FriedenHQ - my personal website
The Way Inn - our Neverwinter Nights server

@Rogue

ok, ok.. don't make angry!!

_________________
My site http://www.amigasoft.net

@afxgroup

Dangerous! , listen to hjf!!

there is a reason why i havent touched my vcore yet and i know mine is wrong even!.

_________________
GAMES,i LOVE GAMES! .. Check my Website. at http://amigaguru.kicks-ass.net

@Rogue
@afxgroup

Quote:

. Probably your is 1,59 for 800Mhz G4. Most users have 1,64 for their 933 G4.

Infact i haven't stated any "right for sure".
Check the post about vcore by sg2 or check the post on Intuition base.

@Rogue
If he has crash he can upper to the next unit (0,05) his voltage and if the machine stable probably the vcore is now correct, or not?
Too little -> crash at 100% cpu usage
Too high -> you cpu can die

Mine crash at 1,69, at 1,74 is perfectly stable.

@afxgroup
NOOOO 1,79 is too much. Most 7455 G4 933 use 1,64, as rogue said you should check your cpu (you need to remove all the mb).

_________________
AmigaNews.it

@afxgroup

I use wpa instead of vmem myself because its the only one that works.

Vmem pops up a window for a fraction of a section-thats all.

Video driver fails to initialise.

I`m using a radeon 9100 crucial.

Last edited by cap on 08-Feb-2005 at 06:01 PM.
Last edited by cap on 08-Feb-2005 at 05:59 PM.

_________________
A1/G4 1GHZ

OS4.1 latest update.
512mb Radeon Club3d 9250
Usb/Dma fixed.

@cap

it is strange. this could depend from wrong os4 installation or wronk hardaware setup

_________________
My site http://www.amigasoft.net

@afxgroup

the vmem act the same here too, a window pops up and closes down...
i have a radeon7000.

_________________
AOS4 Betatester, Peg2, G4@1ghz, Radeon 9250 256mb, 1gb RAM.

http://www.asciiarena.com
http://www.uprough.net

@spotUP

i really don't know.. vmem should work. It use some CGX functions. I don't know. Maybe a CGX problem

_________________
My site http://www.amigasoft.net

@afxgroup

I have this problem with "vmem" too; only "wpa" works. I use a Voodoo 3000. Who can save us the day?

_________________
And may the AmigaGuide you!

AmigaOne G3-SE, OS4 Final (July 2007 update), Debian Sarge, 512 MB RAM, 20 + 80 GB hard disks, NEC 3540 DVD writer, LG DVD reader, Radeon 9250, SB Live, Intracom Netfaster router, PCI USB card (NEC - OHCI/EHCI)

@mwoof

Same problem here as well.

_________________
µA1-C - 750FX 800MHz, 512MB, 500GB HD, DVD-RW, OS4.1
Sam440ep - 440EP 667MHz, 512MB, 700GB HD, DVD-RW, OS4.1

@salass00 and other

it is really strange.. but are you using -vo cgx_vmem? That effect seems when you use overlay (the default method without specify -vo parameter)

_________________
My site http://www.amigasoft.net

@afxgroup

You are correct about the overlay.

I left out the -vo bit but it still tried overlay.

Checking further.

Are you sure you dont have overlay as default.
If so how do we turn it off?

Last edited by cap on 08-Feb-2005 at 07:46 PM.

_________________
A1/G4 1GHZ

OS4.1 latest update.
512mb Radeon Club3d 9250
Usb/Dma fixed.

@cap

overlay is the default method.

ou must specify the parameter:

-vo cgx_vmem

_________________
My site http://www.amigasoft.net