@1Mouse

Not if you wont to play video in mplayer.

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

@sundown

Burning discs? We have diskimage to avoid that nonsense.

@1Mouse

Make sure that you have the following line in your SYS:Kickstart/Kicklayout file

MODULE Kickstart/RadeonHD.chip

if not then you have to add it manually.

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@NutsAboutAmiga

You need to buy 1.x first, then a discount for 2.x if wanted after, or pay more for 2.x to start.

_________________
Hate tends to make you look stupid...

@Rob

Quote:

We have diskimage to avoid that nonsense.

Right, not sure 1Mouse has that app installed. Why they don't offer an archive is beyond me.

_________________
Hate tends to make you look stupid...

@Spectre660

MODULE Kickstart/RadeonHD.chip is not in SYS:Kickstart/Kicklayout file.

If I add the line into the kicklayout file and restart with it still boot with the onboard M9 chip?

I do have one problem I could probably do with fixing, my computer doesn't boot properly, it first goes into uboot where I type boota and it loads from the hard drive.

I also at some point have to install my OS4.1 final edition.

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

@1Mouse

Quote:

If I add the line into the kicklayout file and restart with it still boot with the onboard M9 chip?

I think that will depends on if driver finds a monitor or not.

Quote:

my computer doesn't boot properly, it first goes into uboot where I type boota and it loads from the hard drive.

That's just some setting missing in uboot.

http://forum.hyperion-entertainment.biz/viewtopic.php?f=16&t=2087#p23502

if look at his config and compare it with yours.
(He has different problem then you)

Last edited by NutsAboutAmiga on 04-Mar-2015 at 09:56 PM.
Last edited by NutsAboutAmiga on 04-Mar-2015 at 09:45 PM.

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

@NutsAboutAmiga

Would it be better for me to get OS4.1 FE installed before I carry on with my RadeonHD driver issues?

At the moment when I put the OS4.1 FE disc in the computer and restart it appears to be low res and all I see is the top half of a boing ball with the word "booting" above it and even when left it still doesn't seem to go any further and the CD drive seems to have no life

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

Will I ever see OS4.1FE installed.

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

@1Mouse

Have you tried reading the install guide?
Have you tried booting from CD?

Any way this kind of questions should be asked in the support forms.
http://forum.hyperion-entertainment.biz/

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

@1Mouse

Quote:

@Spectre660 MODULE Kickstart/RadeonHD.chip is not in SYS:Kickstart/Kicklayout file. If I add the line into the kicklayout file and restart with it still boot with the onboard M9 chip?

Yes, it will boot just fine (provided that you copied RadeonHD.chip to the Kickstart/ drawer beforehand. If the primary graphics card is a Radeon M9, then it will load the atiradeon.chip driver. The kicklayout line above just makes the Radeon HD driver available for us on bootup.

Quote:

1Mouse wrote: @NutsAboutAmiga Would it be better for me to get OS4.1 FE installed before I carry on with my RadeonHD driver issues?

Yes. The Sam440 OS4.1 FE CD does not include the Radeon HD driver, so it won't be able to boot with the Radeon HD card as the primary graphics card. It is possible to choose the primary graphics card in UBoot, but it would be much easier to install the OS first, and the card later.

You may also want to check that you have the latest version of UBoot installed on your Sam440. I can't remember if it was fixed, but there were older versions of UBoot for the Sam440 that would show UBoot on one graphics card, but OS4 would boot on the other.

Hans

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.

@Hans

Have got U-Boot v1.3.1c but only 3 basic options:

Video Option
Boot Sequence
System Information

At this moment forget about the video card, I just need to get into AmigaOS4.1FE

HELP

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

@1Mouse

Quote:

1Mouse wrote: @Hans Have got U-Boot v1.3.1c but only 3 basic options:

I wouldn't have a clue which UBoot version is what, but the choice of which graphics card to use is usually under "Video options"


Quote:

At this moment forget about the video card, I just need to get into AmigaOS4.1FE

Exactly what is the difficulty there? Isn't the installation procedure roughly the same as for AmigaOS 4.1?

If you still have that Radeon HD card plugged in, then remove it for now.

Hans

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.

@Hans

At the moment to get into any workbench I have to boot from the hard drive which is OS4.1.6,

Once into workbench 4.1.6 when you insert the OS4.1FE there is no install open on the CD which means you have to boot from the CD which I can't do

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

@1Mouse

Can you do the nvgetvar command from the cli in OS4.1 update 6 and post the output.

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@1Mouse

I don't know why the Sam version of FE is missing the HD driver, one of the reasons for FE was to have a bootable recovery CD and here it fails. Perhaps it was thought Sam 440 users wouldn't want to upgrade the VGA but an earlier Sam ISO has the opposite problem!

In any case what's stopping you from booting the CD? UBoot not booting CD? Blank screen? If you have the onboard VGA enabled in UBoot and the monitor hooked up to it then the CD should work fine.

@Spectre660

3. System:> nvgetvar
baudrate=115200
loads_echo=1
stdout=vga
stdin=usbkbd
ide_doreset=on
ide_reset_timeout=20
ide_cd_timeout=20
menucmd=menu
boot_method=boota
ethaddr=00:50:C2:80:D1:14
eth1addr=00:50:C2:80:D1:15
boot_config=Default
ethact=ppc_4xx_eth0
sii3114ide_xfer=gggg
s4sii_maxbus=1
menuboot_cmd=menu
bootcmd=menu
video_activate=internal
hush=1
ipaddr=xxx.xxx.x.xxx
serverip=xxx.xxx.x.xxx
boot1=ssiicdrom
boot2=ssii
boot3=
boota_timeout=1
menuboot_delay=5
os4_commandline=debuglevel=0
bootargs=root=/dev/sda3

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE

@1Mouse

You have the wrong settings for the boot devices .
You can set the correct ones from the workbench cli by typing the following commands each followed by the enter key.

nvsetvar boot1=s4siicdrom
nvsetvar boot2=s4sii

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@1Mouse

I think your menuboot_cmd is wrong. It should be "boota" or at least that's what I have it as here.

Output of nvgetvar on my sam460:
Quote:

7.RAM Disk:> nvgetvar baudrate=115200 loads_echo=1 hostname=Sam460ex stdout=vga stdin=usbkbd ide_doreset=on ide_reset_timeout=15 ide_cd_timeout=20 pcie_mode=RP:RP pciconfighost=1 bootcmd=menu; run menuboot_cmd menucmd=menu boot_method=boota usb_enable_4x0=1 usb_retry=1 usb_ohci_power_down_before_reset=1 scan_usb_storage=1 ethact=ppc_4xx_eth0 ethaddr=00:50:C2:80:D5:46 ipaddr=192.168.1.133 serverip=192.168.1.105 serdes=sata2 sam460sata_verbose=1 sam460sata_conf=1 video_activate=pci hush=0 ver=U-Boot 2010.06.05a (Jan 30 2012 - 16:06:56) menuboot_cmd=boota boot1=ssiicdrom boot2=ssii boot3=sata2-460 boota_timeout=2 menuboot_delay=2 os4_commandline=serial debuglevel=5 boadrate=115200 munge bootargs=root=/dev/sda3 console=tty0

@Spectre660

I have changed the 2 variables as descrubed and when rebooting it comes up with the uboot prompt "]"

However at this point with the OS4.1 FE in the CD drive when I type boota it loads the kickstart 4.1.6 from the haard drive nut then goes on to the splash screen for the FE CD which shows part of a boing ball with word Booting above it.

At this point it seems to be doing no more it just stays on screen.

_________________
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1FE
Sam460cr + OS4.1FE