0) My setup
AmigaOne 500 w/OS4.1v4
2GB RAM
HD4650 gfx
Onboard sound
64GB SSD (main)
500GB HDD (secondary)
4-port SATA PCI card
Netgear WNCE2001 ethernet-to-wifi gizmo
NEC 20WGX2 Pro monitor

1) Drawer icon size
I installed the DVPlayer demo to Utilities. I decided to do the expert installation just to see what it involved. At one point I was asked to choose icon size.

I compared with the other icons in Utilities and decided size 56 looked closest. But the drawer ended up much smaller than the others. So I tried to reinstall, this time choosing size 64. But the size of the drawer did not change. So, erm, how do I make it the same size as the others?

2) Subtitles
I have a DVD with NO, SE and FI subtitle options. But no matter which I select in the subtitle menu, subtitles end up being FI. How come?? Changing audio stream works fine though.

3) Fullscreen
I know fullscreen is disabled in the demo. But I remember from the OEM version (0.72) that came with OS4 that going fullscreen only gave a black screen, on my setup atleast. Is this a known issue, or something wrong on my end? If its a known issue of 0.72, is it fixed in 0.76? I'd be happy to pay for DVPlayer Full, but I need to make sure it will get proper fullscreen out of it.

Thanks for any input! :P

Last edited by Androxyn on 03-Aug-2012 at 10:10 PM.

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@Androxyn

1) Drawer icon size is fixed. The icon size you choose during installation is for the executable, not for the drawer.

2) Have not seen this issue, it would be good to know if it happens on your setup with just one particular DVD or is a general issue on that machine with all DVDs.

3) You won't get proper full screen without working overlay. Overlay is not likely to be implemented in Radeon HD drivers, instead planar YUV modes will be implemented for compositing and then DvPlayer will have to be updated to use compositing for rendering. I do not know when this will happen.

@Androxyn Quote:

the drawer ended up much smaller than the others. ... how do I make it the same size as the others?

It sounds like DVPlayer is using an old-style OS4 icon for the folder. The simplest way to fix this is to click on the folder icon, press LeftAmiga-I (or use Icon/Information... menu) to open a info window, and then drag'n'drop an icon with your desired look onto the icon shown in the window. The shown icon should change, at which point you can click on Save. Done!

Quote:

going fullscreen only gave a black screen

That could be due to DvPlayer using a custom low-resolution screen (such as 320x256) for the video. RadeonHD cards don't correctly support such resolutions, so you get a black screen.

Most likely cause of such a low-resolution screen is that it was wrongly added by RunInUAE r6. This will be fixed by the next release of RunInUAE, but if you cannot wait then start Sys:Prefs/ScreenMode, go to the Monitors tab, and then UNtick 320x256@60 & 320x240@60, and then click on Save Monitor, wait a few seconds for harddisk activity to finish, and then reboot. WARNING: This can potentially prevent Workbench from being visible (especially if you make a mistake), so only do this if you know how to boot from OS4's installation CD (or SD card or whatever you have).

Last edited by ChrisH on 29-Jul-2012 at 12:08 PM.
Last edited by ChrisH on 29-Jul-2012 at 12:08 PM.

_________________
Author of the PortablE programming language.
I love using Amiga OS4.1 on my A1-X1000 & Sam440
Don't forget the official support forum for OS4!

@ChrisH

The monitor tab at Prefs/ScreenMode is greyed out.

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@Androxyn Quote:

The monitor tab at Prefs/ScreenMode is greyed out.

That's due to DDC (aka "Detect settings automatically") being enabled. If you UNtick "Detect settings automatically", then you should be able to untick the relevant resolutions, then REtick "Detect settings automatically", click "Save Monitor", etc.

BTW, I believe that ticking "Detect settings automatically" will cause *all* listed resolutions to become unticked when you save. But most likely you don't want any custom resolutions, so this should be OK.

_________________
Author of the PortablE programming language.
I love using Amiga OS4.1 on my A1-X1000 & Sam440
Don't forget the official support forum for OS4!

@ChrisH

Quote:

If you UNtick "Detect settings automatically",

Trouble is, you need to use the "monitor" tab to do that, & its ghosted.


@Androxyn

Just a guess, but open your Devs:Monitor icon info & see if you have a line that says "Detect Settings Automatically". If its there, put parentheses around that line to comment it out, save & soft re-boot. See if that un-ghosts the monitor tab for you.

_________________
X1000! Party on
Pure Gold
Hate tends to make you look stupid...

@sundown (and Androxyn)
In the monitor icon Tooltypes, isn't "Detect Settings Automatically", but rather "DDCMODE". BUT BEWARE that commenting-out that line, when you don't have any (usable) custom resolutions defined, may cause booting problems (either lack of any visible screen, or only limited to 640x480).

MY advice is that if you are fiddling with the monitor's icon tooltypes, then simply look for lines that look like "MODE=320x240@60" and "MODE=320x256@60" (possibly with a "D" at the end), and put brackets around it (e.g. "(MODE=320x240@60)" ) to comment it out. Take GREAT care! Then Save the icon.

_________________
Author of the PortablE programming language.
I love using Amiga OS4.1 on my A1-X1000 & Sam440
Don't forget the official support forum for OS4!

@sundown

Devs/Monitors/PCIGraphics has the following commands in Tooltypes:

CMPLENGTH=11
BOARDNAME=PCIGraphics
DDCMODE=All
(VSYNCMIN=60)
(VSYNCMAX=60)
(HSYNCMIN=31000)
(HSYNCMAX=85000)
(FAKENATIVEMODES=Yes)
INTERRUPT=Yes
MODE=320x240@60D
MODE=320x256@60D

Edit: I think either my gfxcard or my monitor insists on going to 1680x1050 at fullscreen, so any app which tries for fullscreen and don't support that res will fail.

Last edited by Androxyn on 30-Jul-2012 at 10:26 AM.
Last edited by Androxyn on 30-Jul-2012 at 10:20 AM.

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

Quote:

In the monitor icon Tooltypes, isn't "Detect Settings Automatically", but rather "DDCMODE". BUT BEWARE that commenting-out that line, when you don't have any (usable) custom resolutions defined, may cause booting problems (either lack of any visible screen, or only limited to 640x480).

How do I force OS4 to ONLY look for 1680x1050 at startup? As it is, it will go black for a while, apparently trying different resolutions before finally landing at 1680x1050.

I can't risk doing the DDCMODE thing since my gfxcard/monitor will refuse to show anything but 1680x1050 in fullscreen.

Monitor is a NEC 20WGX2, btw.

Last edited by Androxyn on 30-Jul-2012 at 10:32 AM.
Last edited by Androxyn on 30-Jul-2012 at 10:25 AM.

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@Androxyn

From Severin (due to a posting issue)

Quote:

Try this in a shell enter: rename envarc:sys/screenmode.prefs envarc:sys/screenmode.off delete env:sys/screenmode.prefs Then run screenmode You should now be able to access the monitors tab. select: Detect settings automatically Monitors Prefered Mode Enable Interrupts Then save. If you still can't access monitors rename the envarc file back to it's original name.

#6

_________________
This posting, in its entirety, represents solely the perspective of the author.
*Secrecy has served us so well*

@number6

I followed the instructions but monitor was still greyed out.

Edit: When viewing root in Lister I don't see any Env. Should that have been Envarc too?

Last edited by Androxyn on 30-Jul-2012 at 06:55 PM.

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@Androxyn

For dvplayer usage on a sam460 amigaone 500 youll have to have to use the tooltype nooverlay enabled.

overlay isnt supported on radeonHD cards.

@Androxyn

From Severin again:

Quote:

env: is a hidden file system

#6

_________________
This posting, in its entirety, represents solely the perspective of the author.
*Secrecy has served us so well*

@COBRA

instead planar YUV modes will be implemented for compositing and then DvPlayer will have to be updated to use compositing for rendering. I do not know when this will happen.

THIS is a fantastic news ! Thanks a lot, i'm looking forward to have it

_________________
Sam 460EX, 2Gb Ram, Radeon HD4670 ddr3, AmigaOS4.1.6
A4000 PPC604@233, Mediator
A1200 PPC603@160, Mediator
uA1 G3@800, 512 Mb [sold]

@Androxyn
Please follow my advice & put brackets around the low-res MODE lines, like so:
Quote:

CMPLENGTH=11 BOARDNAME=PCIGraphics DDCMODE=All (VSYNCMIN=60) (VSYNCMAX=60) (HSYNCMIN=31000) (HSYNCMAX=85000) (FAKENATIVEMODES=Yes) INTERRUPT=Yes (MODE=320x240@60D) (MODE=320x256@60D)

(The bolded part is what I changed)

Now (after a reboot) DVPlayer should at least show a screen, although who knows what it actually shows.

_________________
Author of the PortablE programming language.
I love using Amiga OS4.1 on my A1-X1000 & Sam440
Don't forget the official support forum for OS4!

@ChrisH

Well, bought 0.76, had same fullscreen issue as with 0.72, decided to follow your advice about putting brackets around those lines, and now boots into total darkness. Black Workbench :S Heeelp

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@COBRA

Quote:

Overlay is not likely to be implemented in Radeon HD drivers, instead planar YUV modes will be implemented for compositing and then DvPlayer will have to be updated to use compositing for rendering. I do not know when this will happen.

Ahhh lets hope we get it soon. I love DVplayer

_________________
AmigaOS on Google+
AmigaOS on Facebook

@joeled

Lets not go all hopey and positivy here, and risk losing sight of the important matter: that I can no longer see my Workbench and thus have been rendered Amigaless just like that. Again, heeeelp!

_________________
OS4.1u6 on AmigaOne 500, 1.15GHz, 2GB, Radeon HD4650, SM502 sound, 64GB SSD + 500GB HDD

@Androxyn

I damaged my workbench too after installing this ptplay_tnplug from os4depot. It freezed my system and now i just get alot of error when i boot my computer.

_________________
AmigaOS on Google+
AmigaOS on Facebook

@Androxyn

Can you boot from your OS4.1 CD?

If so then you can go back into your monitor tooltypes and change the settings

_________________
2x A500 (1x 1MB) OS1.3
1x A600 (40MB HDD) OS2.05
2xA1200 (68020 8MB Fast RAM) OS3.9
1x CD³²
1 AmigaOne G4XE (OS4 Pre-Release Update4)
Minimig
Sam440ep + OS4.1.5