I'm trying to install Wazp3d in my SAM460ex with OS4.1FE, but I'm confused by the installation instructions:

The instructions given are:
Wazp3D-Prefs should be copied to your SYS:Prefs directory
Rename existing LIBS:Warp3D.library to LIBS:Warp3D.library-save

Is this above referring to AmigaOS4.1 or all Amiga-like OS?

Then it also says:
If you are not using WinUAE but a real OS4 PPC Amiga (which I'd assume is my case)
copy Wazp3D.library-ppc TO LIBS:Warp3D.library

But Warp3d.library is a file and not a drawer.

What about all the other files in the Wazp3d drawer after decompression of the Wazp3d.lha?

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST

@WeiXing3D

It could be clearer, but what you do is copy the Wazp3d.Llibrary to LIBS. if there is an existing warp3d.library (that was part of the OS4 installation) rename it to warp3d.library-old (or -save) & rename the Wazp3d.library to Warp3d.library & use the comment line to show origional Wazp3d name for future reference. What your doing is subsituting the wazp3d.library for a real warp3d.library.

_________________
- BCP
AmigaOne X1000 & Amiga 4000

Amiga Response Crew Users Group
Indianapolis, IN USA

@WeiXing3D

in your case backup the warp3d.library in your Libs:
then rename Wazp3D.library-ppc from wazp archive in warp3d.library and copy it into your libs dir.
prefs program goes in prefs dir naturally.

@BCP

Thanks. That makes everything clear now.

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST

@wawa

Which one goes into Sys:Pref, Wazp3D-Prefs or Wazp3d-Prefs-OS4?

How do you use the Wazpd3d-prefs? Double clicking to pen either one doesn't do anything.

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST

@WeiXing3D

On real Amigas (I have no idea about fake OS4 Amigas) you put the Warp3D library in libs and the Warp3d folder containing the Warp3D GFX and HW driver libraries directories with the drivers for your system in libs too.

_________________
Using: One Commodore C64 - One Commodore Amiga 500 - One Commodore Amiga 1200 with BVision and Blizzard 68060 with PPC coprocessor running Amiga DOS - One Hellbillylitre Amigatwox86x64x6000x running Windows7

@WeiXing3D

if you use os4 then you may want os4 version of prefs, at least thats what i would be thinking.

@wawa

I copied Wazp3d-Prefs-OS4, but I still don't understand how to use those preferences. Double clicking doesn't do anything.Quote:

wawa wrote: @WeiXing3D if you use os4 then you may want os4 version of prefs, at least thats what i would be thinking.

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST

@WeiXing3D
Sorry if this isn't what you want, but have you tried using one of the newly supported Radeon HD cards for Warp3D instead of Wazp3d?

_________________
http://www.hostcove.com
http://www.youtube.com/hostcove
Sam460 : X1000 : X5000

@logicalheart

Sure I will, when I get some extra cash to spare

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST

Hello

There is not much to understand
1) save your original Warp3D.library by renaming it as Warp3D.library-save
2) rename Wazp3D.library-ppc as Warp3D.library and put it in sys:libs/
3) copy Wazp3D-Prefs-ppc in your prefs folder

If Wazp3D-Prefs-ppc dont works so your install is not good ...

Alain Thellier

@WeiXing3D

I would have thought a simple installer could be included here. By the time the instructions are written up an installer could almost have been written. I've had skeleton installer code lying around for years. I tweak a few files names and that's pretty much it.

Last edited by Hypex on 27-May-2015 at 03:30 PM.

@WeiXing3D

First of all what version are you trying to install?

The instructions I have are:

Wazp3D-Prefs should be copied to your SYS:Prefs directory
Rename existing LIBS:Warp3D.library to LIBS:Warp3D.library-save
If you are not using WinUAE but a real OS4 PPC Amiga
copy Wazp3D.library-os4 TO LIBS:Warp3D.library

so:

Extract the archive to ram: and in a shell enter:

ram:Wazp3D/
copy Wazp3D-Prefs-OS4 to sys:prefs/Wazp3D-Prefs
copy Wazp3D-Prefs-OS4.info to sys:prefs/Wazp3D-Prefs.info
rename libs:warp3d.library warp3d.library.save
copy Wazp3D.library-os4 libs:Warp3D.library
copy cfg-os4 sys:storage all


Quote:

Is this above referring to AmigaOS4.1 or all Amiga-like OS?

Irrelevent question, you're asking if the above is refering to 'a hamster' or something that 'looks, sounds, smells, eats and craps like a hamster'. ALL Amigalike OS's have sys:prefs.

Quote:

If you are not using WinUAE but a real OS4 PPC Amiga (which I'd assume is my case) copy Wazp3D.library-ppc TO LIBS:Warp3D.library But Warp3d.library is a file and not a drawer.

No it's not because you have renamed it by this stage, warp3d.library no longer exists.

Last edited by Severin on 27-May-2015 at 06:20 PM.

_________________
OS4 Rocks
X1000 beta tester, Sam440 Flex (733)

Visit the Official OS4 Support Site for more help.

It may be that your sole purpose is to serve as a warning to others.

@Severin
Thank you.

_________________
Amiga 1200 fully loaded. AmigaONE X5000 w/AmigaOS 4.1 FE / MorphOS 3.9 in Mac Mini G4 1.5GHz. Acer Aspire One with AROS Icaros FPGA Replay and MiST