Help me!!!

I have my Amiga One X-5000 in a bad strange situation.

Let's explain the matter.I think it all went burst after copying my Arabic Console files over Amiga Workbench partition and Z lib.After giving GR error it all turned down and out.The reason why I have my A1-X5000 out of place is that I tried to move files from Workbench: to Work: and then at 75% more or less it stopped on the great Amiga program that is Dir.Opus.

Anyway what do you think?

What do you think are the commands i have to enter on U-Boot to restore the message denial?

I hope you can help me to restore my Amiga OS 4.1 installation.

Thanks

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

I feel better when my AmigaOS is loaded than when no at all.Is time and place for me

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Dir opus is not perfect on amigaOS 4.1. (old and not updated)
Were you just copying or some other task (like moving..which copies and deletes)

If just dir opus just died... you might just be able to re-start and resume your copying (?)

You may have to re-install your OS and add your programs one by one..

consider using Amiga Explorer, it's newer and updated.

@SACC-dude

Workbench Explorer, not Amiga Explorer.

@newlight

Quote:

Let's explain the matter.I think it all went burst after copying my Arabic Console files over Amiga Workbench partition and Z lib.

The Arabic Console files look okay. Archive slightly messy. But don't see anything that would ruin a system.

Where did you get ZLib from and why were you installing it? Looks like the system had one built in.

Quote:

The reason why I have my A1-X5000 out of place is that I tried to move files from Workbench: to Work:

By move you actually mean move, not copy? In that case you need to move them back! Or copy them back, rather.

Quote:

Anyway what do you think?

I think you should boot the OS4 CD or SD that came with your X5K. You have an OS4 disc that came with it I hope?

Quote:

What do you think are the commands i have to enter on U-Boot to restore the message denial?

What message is it?

I think you need to boot an OS4 disc and then copy the files back from Work.

@SACC-dude

Dir Opus just don't died it was convalent

No problem here with Dir.Opus.Only a problem of misconfiguration OK.

Where is Amiga Explorer? I don't know where it is non have it

Hope this helps to understand my yesterday suffering and glory

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@Hypex

Yes...FINALLY!!

I booted the AmigaOS 4.1 FE CD for Amiga One and when I copied the files on Workbench from Work it fianlly works at it should.Now this evening I make a cleaning of duplied files over Workbench and all goes well,visiting the places I have done


I have the CD promoted for the Amiga One X-5000 but I have not yet installed on the proper machine the Amiga One.It rocks sure!!

Good night and very happy and cheerful now with my X-5000 system-setup

Glory!!!

Metal

and

Peace

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

It all went from one day to another and climbing the mountain to reach up

Thanks to all of you without your moral support and longevity this wasn't be possible.

Thanks

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@SACC-dude
Quote:

Dir opus is not perfect on amigaOS 4.1. (old and not updated)

There is a more recent version of Dopus4 (2015) for OS4.x at OS4Depot. Dopus5 is also there. I've been using the recent version of Dopus4 for several years with no problems.

_________________
X1000 with 2GB memory & OS4.1FE

Also a Roll Back and cd boot. Don't Really know better as one hd went, just got a new one and the XE was in repair for months.

JFX SSF2 FFS,

Got the first two, just for the sake of don't use JFX. I Know PFS is better.

PC people don't need to know about these.

Again waiting for the net proggies and..

Last edited by PR on 15-Dec-2017 at 08:33 PM.

@Xenic

Thanks for the info.

I still suggest WorkBench Explorer. It has some great new tools that fit todays usage!

@newlight

It's on os4 depot...


Quote:

newlight wrote: @SACC-dude Dir Opus just don't died it was convalent No problem here with Dir.Opus.Only a problem of misconfiguration OK. Where is Amiga Explorer? I don't know where it is non have it Hope this helps to understand my yesterday suffering and glory

@newlight

Glad you was able to boot OS4 and restore your files. It almost looks as if you rolled across a piano with those anim smileys.

Last edited by Hypex on 16-Dec-2017 at 02:52 PM.