Quote:

E-UAE optimalized, though it than WinUAE version.

Why does AmigaWorld.net allow posts like these? Don't you realize it diminishes the quality of the AmigaWorld.net brand and reputation? Unless you don't require your users to proof read their posts themselves, then please see to it yourself.

_________________
That'll Put Marzipan In Your Pie Plate, Bingo
💻 Pro-Amiga, 🌍 Pro-Globalism, 🍅 Pro-Vegan, 🛦 Pro-NATO & 🇪🇺 Pro-Joint EU Defense Intervention Initiative

Just correct it, no big deal!

@Petah

Happier now?

Being fair, English isn't everyones first language, and so it may not appear to be too bad for them.

_________________
Test sig (new)

Would you fix this one as well?
Quote:

Linux tested, nice work , internet, games , demos.

I'd say: "Tested on linux (internet, games, demos) and working nice."

Or something like that...

Petah,

and could you tell us in what way e-uae is slower than winuae? Mind you, e-uae also has jit support on intel, and display routines (at least in some ports) are certainly faster than winuae ones.

Now if you compare apples and oranges by comparing winuae (on intel, so with JIT) and e-uae on powerpc (without jit), then you're really wrong. And if you're not sure, just note that winuae & e-uae share 99% of the same code, and the difference just resides in video/sound/ui drivers (which are certainly not "optimized" at all).

Last edited by Fab on 29-Oct-2007 at 02:07 PM.

Really onto his applicability he was understood. Was a couple of clerical error only and now already , somebody else his front received a sense. Naturally the x86 JIT faster than single PPC E-UAE on what JIT is not. I am not top notch perfect in English and in the morning 5:00 when I put up the article , a whole night-worker was an adventure the test, in the morning work , I am sorry for it and for the clerical errors.

Dary

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

Hi Dary,
E-UAE optimised, though it's slower than the WinUAE version.

Speaking of clerical errors, OS4-Euae doesn't support JIT. If fact WinUAE of any thing has no equivalent in OS4Euae or linuxEuae. If you want to 'emulate', learn to enjoy the errors!
The NewIcons work well in a non-JIT system, but png icons will kill your drawing time.
edit:

Another clerical error -- HDF. Using Wilkisons' DiskImage.device to create FFS2 files
is required. HDF works for linux, not for OS4.

Last edited by Snuffy on 29-Oct-2007 at 05:44 PM.

_________________

E-UAE optimised, though it's slower than the WinUAE version. Linux onto a version understanding , and onto the applicability !

I draw your attention to the 6. writing. I know it , that Os4/MOS/MAC PPC onto machines is not JIT, but I believe it this not my mistake. I was not able to test it on all platforms , but Linux into a version may be GUI to turn up HDF-et , .uaerc it is necessary to write it in a file. I know it E-UAE onto all platforms uniform , so if HDF goes on Linux it is going other on a version, MOS they write about him in description.

HD in E-UAE it is necessary to configure it, and there to run. If this is not solvable then EUAE versions not identical somebody else on a platform ? This AmigaSYS version theoretical E-UAE to versions is , but if HDF does not go speak and I drop it LZX.

No use 3.9 and PNG icons
OS 3.1 no PNG icons system , 8 or 32 bit support. 640*480 8 bit may not be so slow .

MOS readme :

-W
Hardfile specifications, arguments are: access, sectors, surfaces,
reserved, blocksize, path format

Last edited by Dary on 29-Oct-2007 at 06:21 PM.
Last edited by Dary on 29-Oct-2007 at 06:18 PM.
Last edited by Dary on 29-Oct-2007 at 06:15 PM.

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

@Steve

E-UAE optimised, though it's slower than the WinUAE version.

I am asking you rewrite it , that Linux JIT from a version there is a word, or this AmigaSYS E-UAE his optimized version, onto which is E-UAE is going theoretical on it, he was tested on Linux.

Thx

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

@Dary

I have amended it again, to what I hope is more accurate based on the messages posted here. If it needs more alterations please let me know.

_________________
Test sig (new)

I say thank you for it Steve , in this manner perfect according to me. Once more sorry...

Os4/MorhpOS for people : LZX version 30 minutes and can be poured

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

Quote:

HDF works for linux, not for OS4.

Stop spreading false information about E-UAE.

How many times do I have to repeat this.

I have used hardfiles in E-UAE on OS4 several times without problems. Obviously you will have to configure it correctly before it will work though.

If it mounts in diskimage.device then you could try using the same "geometry" as it uses (blockspertrack = 1, surfaces = 1, blocksize = 512).

Was not my occasion to test , but has to go according to me , E-UAE onto all platforms though it , taking out of JIT support , who HDF does not suit it LZX version downloadable.

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

@Dary

Good work, and thanks. I tried out AGA AmigaSys3 recently on AROS euae (which has jit cpu emulation) and it works very well. Very impressive for a one man job, and please dont let other peoples negativity put you off continuing it. On another note, seeing as youve covered most other options is there any chance of an Amithlon version ??


@others

Sheesh people, its quite clear that Dary is not an English native speaker. Even having said this it doesnt take a rocket scientist to work out the jist of what he's saying. How about trying to apply a bit of grey matter before responding negatively. What is it with Amiga people and thier strange need to be right ? Even when what was "wrong" was merely a case of the language barrier, or an inability to check on things himself (due to a lack of certain systems) and relying on other peoples help.
I spent maybe an extra minute reading these posts and it was pretty clear what was being said.

Last edited by fishy_fis on 30-Oct-2007 at 11:18 AM.

I say thank you for the understanding , AROS not AmigaSYS AGA you looked at a version ? :) Because you miswrote it then ... :) I am asking you correct it before this would be ambiguous :)

Amithlon version I plan it possibly then later , was not my time yet to look at.

Last edited by Dary on 30-Oct-2007 at 11:10 AM.

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

@Dary

oops, sorry, seems I was a little distracted when I wrote that,... I fixed it now though

I say thank you for it :)

_________________
AmigaSYS is a fully pre-configured AmigaOS system. Support AmigaOS 3.0/3.1/3.9. Platforms: Amiga computers and emulators. http://www.amigasys.com

I have used HDF files on MOS too.
But what I've read it's not supported is Picasso96 in MOS version at least.
Anyway, emulation without JIT it's somehow slow, but usable.

_________________
PowerMac G4 MDD 1.25 Dual MorphOS 3,5 Demo (for a while) Amiga 1200 030 AGA Pegasos 2 G4 (wrecked)

diezi7,

no this is wrong, there are two versions for morphos (coming in the same archive): the sdl one (slower, but supporting p96) and the "native" one (faster, and with an overlay display option, but not supporting p96).

Quote:

no this is wrong, there are two versions for morphos (coming in the same archive): the sdl one (slower, but supporting p96) and the "native" one (faster, and with an overlay display option, but not supporting p96).

Thanks FAB for that correction. I use the "native", and I've never
read it supports P96, really cool.
The SDL version opens
full screen and out of range on my TFT. Could I change it to window mode with
Ctrl+Alt+S?
That means that I will be able to
use AmigaSYS at full resolution if I resolve that first of course.
;-D

_________________
PowerMac G4 MDD 1.25 Dual MorphOS 3,5 Demo (for a while) Amiga 1200 030 AGA Pegasos 2 G4 (wrecked)