and /var/log/messages :

Jan 11 19:48:17 aone exiting on signal 15
Jan 11 19:49:26 aone syslogd 1.4.1#17: restart.
Jan 11 19:49:26 aone kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Jan 11 19:49:26 aone kernel: Cannot find map file.
Jan 11 19:49:26 aone kernel: No module symbols loaded - kernel modules not enabled.
Jan 11 19:49:26 aone kernel: Total memory = 512MB; using 1024kB for hash table (at c0400000)
Jan 11 19:49:26 aone kernel: Linux version 2.6.8dmaA1 (root@pegxlindev) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #6 Sun Jan 8 17:45:04 GMT 2006
Jan 11 19:49:26 aone kernel: Creating PCI host controller
Jan 11 19:49:26 aone kernel: Built 1 zonelists
Jan 11 19:49:26 aone kernel: Kernel command line: root=/dev/hdc2 video=radeonfb:1024x768-8@70 l2cr=0x80000000
Jan 11 19:49:26 aone kernel: l2cr set to 80000000
Jan 11 19:49:26 aone kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Jan 11 19:49:26 aone kernel: calibrate_decr: decrementer frequency = 33.333333.6 MHz
Jan 11 19:49:26 aone kernel: ticks per jiffy = 33333, tb_to_us = 128849020
Jan 11 19:49:26 aone kernel: Console: colour VGA+ 80x25
Jan 11 19:49:26 aone kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 11 19:49:26 aone kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 11 19:49:26 aone kernel: Memory: 514304k available (2416k kernel code, 1060k data, 108k init, 0k highmem)
Jan 11 19:49:26 aone kernel: Calibrating delay loop... 798.72 BogoMIPS
Jan 11 19:49:26 aone kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 11 19:49:26 aone kernel: NET: Registered protocol family 16
Jan 11 19:49:26 aone kernel: PCI: Probing PCI hardware
Jan 11 19:49:26 aone kernel: SCSI subsystem initialized
Jan 11 19:49:26 aone kernel: radeonfb: Found Intel x86 BIOS ROM Image
Jan 11 19:49:26 aone kernel: radeonfb: Retreived PLL infos from BIOS
Jan 11 19:49:26 aone kernel: radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=160.00 MHz
Jan 11 19:49:26 aone kernel: radeonfb: Monitor 1 type CRT found
Jan 11 19:49:26 aone kernel: radeonfb: EDID probed
Jan 11 19:49:26 aone kernel: radeonfb: Monitor 2 type no found
Jan 11 19:49:26 aone kernel: radeonfb: ATI Radeon QW SDR SGRAM 64 MB
Jan 11 19:49:26 aone kernel: tridentfb: Trident framebuffer 0.7.8-NEWAPI initializing
Jan 11 19:49:26 aone kernel: Thermal assist unit not available
Jan 11 19:49:26 aone kernel: audit: initializing netlink socket (disabled)
Jan 11 19:49:26 aone kernel: Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Jan 11 19:49:26 aone kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Jan 11 19:49:26 aone kernel: devfs: boot_options: 0x0
Jan 11 19:49:26 aone kernel: Initializing Cryptographic API
Jan 11 19:49:26 aone kernel: Applying VIA southbridge workaround.
Jan 11 19:49:26 aone kernel: Console: switching to colour frame buffer device 128x48
Jan 11 19:49:26 aone kernel: Generic RTC Driver v1.07
Jan 11 19:49:26 aone kernel: Macintosh non-volatile memory driver v1.1
Jan 11 19:49:26 aone kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Jan 11 19:49:26 aone kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 11 19:49:26 aone kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 11 19:49:26 aone kernel: ttyS2 at I/O 0x3e8 (irq = 4) is a 16450
Jan 11 19:49:26 aone kernel: RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Jan 11 19:49:26 aone kernel: loop: loaded (max 8 devices)
Jan 11 19:49:26 aone kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 11 19:49:26 aone kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 11 19:49:26 aone kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
Jan 11 19:49:26 aone kernel: VP_IDE: chipset revision 6
Jan 11 19:49:26 aone kernel: VP_IDE: not 100%% native mode: will probe irqs later
Jan 11 19:49:26 aone kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Jan 11 19:49:26 aone kernel: ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:pio, hdb:pio
Jan 11 19:49:26 aone kernel: ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:pio, hdd:pio
Jan 11 19:49:26 aone kernel: Probing IDE interface ide0...
Jan 11 19:49:26 aone kernel: hda: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
Jan 11 19:49:26 aone kernel: hdb: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive
Jan 11 19:49:26 aone kernel: Using anticipatory io scheduler
Jan 11 19:49:26 aone kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 11 19:49:26 aone kernel: Probing IDE interface ide1...
Jan 11 19:49:26 aone kernel: hdc: Maxtor 2F040L0, ATA DISK drive
Jan 11 19:49:26 aone kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 11 19:49:26 aone kernel: SiI680: IDE controller at PCI slot 0000:00:08.0
Jan 11 19:49:26 aone kernel: SiI680: chipset revision 2
Jan 11 19:49:26 aone kernel: SiI680: BASE CLOCK == 133
Jan 11 19:49:26 aone kernel: SiI680: 100%% native mode on irq 9
Jan 11 19:49:26 aone kernel: ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
Jan 11 19:49:26 aone kernel: ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Jan 11 19:49:26 aone kernel: Probing IDE interface ide2...
Jan 11 19:49:26 aone kernel: hde: QUANTUM FIREBALL CR13.0A, ATA DISK drive
Jan 11 19:49:26 aone kernel: ide2 at 0xe202d180-0xe202d187,0xe202d18a on irq 9
Jan 11 19:49:26 aone kernel: Probing IDE interface ide3...
Jan 11 19:49:26 aone kernel: hdg: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
Jan 11 19:49:26 aone kernel: ide3 at 0xe202d1c0-0xe202d1c7,0xe202d1ca on irq 9
Jan 11 19:49:26 aone kernel: hdc: max request size: 128KiB
Jan 11 19:49:26 aone kernel: hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Jan 11 19:49:26 aone kernel: /dev/ide/host0/bus1/target0/lun0: RDSK p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
Jan 11 19:49:26 aone kernel: hde: max request size: 128KiB
Jan 11 19:49:26 aone kernel: hde: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=25228/16/63, UDMA(33)
Jan 11 19:49:26 aone kernel: /dev/ide/host2/bus0/target0/lun0: RDSK p1 p2 p3 p4 p5
Jan 11 19:49:26 aone kernel: hdb: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)Jan 11 19:49:26 aone kernel: Uniform CD-ROM driver Revision: 3.20
Jan 11 19:49:26 aone kernel: hdg: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jan 11 19:49:26 aone kernel: mice: PS/2 mouse device common for all mice
Jan 11 19:49:26 aone kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 11 19:49:26 aone kernel: atkbd.c: keyboard reset failed on isa0060/serio1
Jan 11 19:49:26 aone kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 11 19:49:26 aone kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 11 19:49:26 aone kernel: NET: Registered protocol family 2
Jan 11 19:49:26 aone kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Jan 11 19:49:26 aone kernel: TCP: Hash tables configured (established 131072 bind 65536)
Jan 11 19:49:26 aone kernel: NET: Registered protocol family 1
Jan 11 19:49:26 aone kernel: NET: Registered protocol family 17
Jan 11 19:49:26 aone kernel: kjournald starting. Commit interval 5 seconds
Jan 11 19:49:26 aone kernel: EXT3-fs: mounted filesystem with ordered data mode.Jan 11 19:49:26 aone kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jan 11 19:49:26 aone kernel: Freeing unused kernel memory: 108k init
Jan 11 19:49:26 aone kernel: Adding 1027416k swap on /dev/hde3. Priority:-1 extents:1
Jan 11 19:49:26 aone kernel: EXT3 FS on hdc2, internal journal
Jan 11 19:49:26 aone kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Jan 11 19:49:26 aone kernel: 0000:00:06.0: 3Com PCI 3c905C Tornado at 0x802000. Vers LK1.1.19
Jan 11 19:49:26 aone kernel: usbcore: registered new driver usbfs
Jan 11 19:49:26 aone kernel: usbcore: registered new driver hub
Jan 11 19:49:26 aone kernel: USB Universal Host Controller Interface driver v2.2Jan 11 19:49:26 aone kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Jan 11 19:49:26 aone kernel: uhci_hcd 0000:00:07.2: irq 5, io base 00802080
Jan 11 19:49:26 aone kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jan 11 19:49:26 aone kernel: hub 1-0:1.0: USB hub found
Jan 11 19:49:26 aone kernel: hub 1-0:1.0: 2 ports detected
Jan 11 19:49:26 aone kernel: usbcore: registered new driver hiddev
Jan 11 19:49:26 aone kernel: usbcore: registered new driver usbhid
Jan 11 19:49:26 aone kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jan 11 19:49:26 aone kernel: CSLIP: code copyright 1989 Regents of the University of California
Jan 11 19:49:26 aone kernel: PPP generic driver version 2.4.2
Jan 11 19:49:26 aone kernel: NET: Registered protocol family 24
Jan 11 19:49:26 aone kernel: lp: driver loaded but no devices found
Jan 11 19:49:26 aone kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jan 11 19:49:26 aone kernel: agpgart: Detected ArticiaS chipset
Jan 11 19:49:26 aone kernel: agpgart: Maximum main memory to use for agp memory: 440M
Jan 11 19:49:26 aone kernel: agpgart: configuring for size idx: 2
Jan 11 19:49:26 aone kernel: agpgart: AGP aperture is 8M @ 0x0
Jan 11 19:49:26 aone kernel: usb 1-1: new low speed USB device using address 2
Jan 11 19:49:26 aone kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-1
Jan 11 19:49:26 aone kernel: usb 1-2: new low speed USB device using address 3
Jan 11 19:49:26 aone kernel: input: USB HID v1.10 Joystick [Mega World USB Game Controllers] on usb-0000:00:07.2-2
Jan 11 19:49:26 aone kernel: AFFS: Unrecognized mount option "suid=1000" or missing value
Jan 11 19:49:26 aone kernel: kjournald starting. Commit interval 5 seconds
Jan 11 19:49:26 aone kernel: EXT3 FS on hdc3, internal journal
Jan 11 19:49:26 aone kernel: EXT3-fs: mounted filesystem with ordered data mode.Jan 11 19:49:26 aone kernel: kjournald starting. Commit interval 5 seconds
Jan 11 19:49:26 aone kernel: EXT3 FS on hdc4, internal journal
Jan 11 19:49:26 aone kernel: EXT3-fs: mounted filesystem with ordered data mode.Jan 11 19:49:26 aone kernel: kjournald starting. Commit interval 5 seconds
Jan 11 19:49:26 aone kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 11 19:49:26 aone kernel: EXT3 FS on hdc6, internal journal
Jan 11 19:49:26 aone kernel: EXT3-fs: mounted filesystem with ordered data mode.Jan 11 19:49:26 aone kernel: kjournald starting. Commit interval 5 seconds
Jan 11 19:49:26 aone kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 11 19:49:26 aone kernel: EXT3 FS on hdc7, internal journal
Jan 11 19:49:26 aone kernel: EXT3-fs: mounted filesystem with ordered data mode.Jan 11 19:49:26 aone kernel: parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
Jan 11 19:49:26 aone kernel: lp0: using parport0 (polling).
Jan 11 19:49:26 aone kernel: parport_pc: VIA parallel port: io=0x378
Jan 11 19:49:26 aone kernel: parport1: PC-style at 0x3bc [PCSPP(,...)]
Jan 11 19:49:26 aone kernel: lp1: using parport1 (polling).
Jan 11 19:49:26 aone kernel: parport2: PC-style at 0x278 [PCSPP(,...)]
Jan 11 19:49:26 aone kernel: lp2: using parport2 (polling).
Jan 11 19:49:26 aone kernel: AC'97 codec is not ready [0xffffffff]
Jan 11 19:49:26 aone kernel: VIA 82xx Audio: probe of 0000:00:07.5 failed with error -13
Jan 11 19:49:26 aone kernel: gameport: pci0000:00:0a.1 speed 1186 kHz
Jan 11 19:49:29 aone lpd[1059]: restarted
Jan 11 19:49:39 aone kernel: [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
Jan 11 19:49:39 aone kernel: agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
Jan 11 19:49:39 aone kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
Jan 11 19:49:39 aone kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
Jan 11 19:49:39 aone kernel: Oops: kernel access of bad area, sig: 11 [#1]
Jan 11 19:49:39 aone kernel: NIP: E20F625C LR: E227D4A4 SP: DCFBBE50 REGS: dcfbbda0 TRAP: 0300 Not tainted
Jan 11 19:49:39 aone kernel: MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
Jan 11 19:49:39 aone kernel: DAR: 00000000, DSISR: 40000000
Jan 11 19:49:39 aone kernel: TASK = ddbd8660[1337] 'Xorg' THREAD: dcfba000Last syscall: 54
Jan 11 19:49:39 aone kernel: GPR00: 00000800 DCFBBE50 DDBD8660 FFFFFFF0 00000000 00000000 DCFBBEBC 00000800
Jan 11 19:49:39 aone kernel: GPR08: E22853F8 00000000 00000800 00000000 00000000 10228E7C 10220000 101C0000
Jan 11 19:49:39 aone kernel: GPR16: 10220000 00000009 10220000 10220000 7FFFFD54 00000001 101F96F8 7FFFF928
Jan 11 19:49:39 aone kernel: GPR24: DBEC0618 E2310000 DC85D620 E2280000 00000000 DFFF94A0 00000000 00000000
Jan 11 19:49:39 aone kernel: NIP [e20f625c] articias_insert_memory+0x88/0x164 [articias_agp]
Jan 11 19:49:39 aone kernel: LR [e227d4a4] agp_bind_memory+0x80/0xd8 [agpgart]
Jan 11 19:49:39 aone kernel: Call trace:
Jan 11 19:49:39 aone kernel: [e227d4a4] agp_bind_memory+0x80/0xd8 [agpgart]
Jan 11 19:49:39 aone kernel: [e22f3ef4] radeon_agp_bind_memory+0x48/0x50 [radeon]
Jan 11 19:49:39 aone kernel: [e22f3b74] radeon_agp_bind+0xec/0x154 [radeon]
Jan 11 19:49:39 aone kernel: [e22f9010] radeon_ioctl+0x114/0x17c [radeon]
Jan 11 19:49:39 aone kernel: [c0069240] sys_ioctl+0xdc/0x2f4
Jan 11 19:49:39 aone kernel: [c0007ce0] ret_from_syscall+0x0/0x44
Jan 11 19:50:00 aone gconfd (lio-1467): démarrage (version 2.10.1), pid 1467 utilisateur « lio »

Hope it helps.
Lio

@PegXlin

Does this mean that the 2.4.26 version of MOL will work with this kernel?

ace

@PegXlin

I get these errors with every kernel I've tried:

hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev hdc, sector 344080
Buffer I/O error on device hdc, logical block 43010

What's causing these errors ?

@PegXlin
Hi PegXlin. Okay I'm afraid I'm missing something in the instructions because
I ended up having to reinstall the old kernel and upgrade to the current sarge
variant for debian. Here is my current setup: Amigaone XE 800MHz G4. Installed
Ross Vumbaca's 2.4.26 debian kernel and upgraded from the woody to sarge version.
Now running KDE 3.3 on the desktop. I have linux installed on a separate hard
disk, partitioned as follows: hdb1 (kernel image boot), hdb2 (swap), hdb3 (root), hdb5 (ext3),
hdb6 (ext3), hdb7 (ext3), hdb8 (ext3), hdb9 (ext3), hdb10 (ext3), hdb11 (ext3).
The hdb3 partition has all the main application folders (/etc, /dev, /home, /tmp, /boot,
. . . ). Hopefully this information will help in guiding me through the upgrade
process. Would like to utilize some of the additional modules and run MOL which
is another topic I need help on with regards to the PegXMac live CD.
Thanks PegXlin,

@janimator

pegxlin dev is running a dedicated forum for MOL, you should ask there for MOL stuff.

to boot kernel from him, you should do what he wrote earlier : burn the kernel and modules to a CD and boot from the CD with the commands diskboot x:y z 500000; bootm as written on the debian quickstart guide provided with your A1.

Lio

@PegXlin

Hi,

Ok I finally found the way to install the latest kernel, now I have error when I try
to load KDE, my video card is not recognize

Here a photo of the ERRORS

http://pages.infinit.net/pgx/IMG_7469.JPG

Thank you.

Bye!

@Pierre55

Quote:

Pierre55 wrote: @PegXlin Hi, Ok I finally found the way to install the latest kernel, now I have error when I try to load KDE, my video card is not recognize Here a photo of the ERRORS http://pages.infinit.net/pgx/IMG_7469.JPG Thank you. Bye!

I use ATI as device for Xorg, and not RADEON

_________________
Best regards,
hnl_dk - Henning Nielsen Lund [Denmark]

Please send no PM to me, email me if you want to contact me. See you somewhere else.

Hi,

When using kernel 2.6, device ids can change for video cards.

Do a lspci at the cmd prompt:

lspci -v

print the output here!

Then edit your /etc/X11/XF86Config-4 (or whatever the file is now for Xorg?)

Then change the PCI:0:1:0 to the output given from the lspci

Also check the correct setting for the driver module?

Pegxlin

@Pierre55

Quote:

Pierre55 wrote: @PegXlin Hi, Ok I finally found the way to install the latest kernel, now I have error when I try to load KDE, my video card is not recognize Here a photo of the ERRORS http://pages.infinit.net/pgx/IMG_7469.JPG Thank you. Bye!

@PegXlin

Hi,

Ok I did that but no succes, I can't boot KDE, I check with my original kernel (2.6.9) and I have the same error when KDE is loading and it load well.

Maybe I can send you something so you can help me more?

Thank you.