Hello Amigas!!

I want to share here the reaction of my Amiga One X5000.

The case or tower was opened last night and the GPU was cleaned with the relevant object. I take some dust out and when I connected the DVD drive spiked but the Amiga doesn't give signal. It remembers me of the now some old Amiga One XE. In order to recover.

What can I do now? May Buy a new ATI RADEON?

If anyone has similar problems please tell me here.

Thanks in advance
😁😝😊❤️🤗🎉😄🙂😄

The Amiga One was only cleaned inside and the motherboard lights are on

Last edited by newlight on 04-Nov-2018 at 04:58 PM.
Last edited by newlight on 04-Nov-2018 at 02:10 PM.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Make sure all the power connections from the PSU are firmly attached, including (if you need one) the 6/8pin lead going to the GFX card. It may just be a loose cable.

I would also suspect the PSU before the GFX card just from previous experience.

Do you have a null modem cable to attach to a PC?

_________________

@Derfs

No I don't have a NULL cable.

Instead I would check the inside the tower cables specially the ones of the PSU. If this helps.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

I checked and attached the tower cables and them...IT WORKED AGAIN!!!!

One cable of a card were badly attached so I unplug and plug again so no problem...The Amiga One X5000 works again.

Happy holydays for me and thank you for your support without this it could't be possible

THANKS!!!

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Only one question:

I have attached to the tower 2HDs.One SATA and the other SSD.

Can I have one more internal disk attached? Is to salvage some Workbench's partition and then probably install Morphos

Last times I opened the tower but I didn't find nothing about SATA cables

Last edited by newlight on 04-Nov-2018 at 05:32 PM.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Quote:

newlight wrote: @newlight Only one question: I have attached to the tower 2HDs.One SATA and the other SSD. Can I have one more internal disk attached? Is to salvage some Workbench's partition and then probably install Morphos Last times I opened the tower but I didn't find nothing about SATA cables

There are 2 SATA connectors on the X5000 motherboard. If you need to add more than 2 SATA drives then you will need a SATA card such as this.

I do not know how this would work with multiple OS' though.

_________________