@anarchic_teapot

I got a fright with this. I update the SLB and UBoot, then found my A1-XE wouldn't boot.

After the initial panic I checked the UBoot settings and it had set to boot from internal VIA by default. I changed that to SII parallel and all was well

Quote:

I got a SII.

Try adding a '1' then to diskboot

diskboot 500000 a:b 1

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

Quote:

am i correct that the "keyboard-mouse-usb-combos" are not yet supported with this update? at least here my hardware is not identified/used.

Mice are unsupported in U-Boot. A combo should be recognized, though, at least my Microsoft wireless combo is correctly identified.

Quote:

also the "auto-usb-keyboard" usage has not made it into this update?

No. Not enough time I'm afraid.

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

@ Rose.

If your customer has no devices attached to the internal via ide, then that can be disabled in intergrated peripherals.
Then in amiga multiboot options change boot device 1 to SII Parallel Disk

_________________
A1200T 603e 330Mhz - Mediator TX OS4.1 F.E.
CDTV 8MB Fast, OS3.1, SCSI, MicroSD SCSI & CD32 FMV
X5000, X1000, A1XE with OS4.1F.E.

@ Rogue (and Hyperion)

Thanks for the update and for your great and beautiful work...

Last edited by Zorro on 05-Mar-2005 at 08:51 PM.

_________________
-------------------------------
AmigaOS, the last hope...

I thought there was preliminary support for the Catweasel Mark IV. How come it's still telling me 'No Catweasel detected'? And the instructions for the booting the update CD-ROM didn't work for me ('diskboot 500000 0:0 0'). I had to leave off the final zero before it would boot.

_________________
--
-=#Val#=-
Valiant@Camelot


Amiga 1000; Amiga 2000; Amiga 3000T; CD-TV; CD32;
AmigaOne-XE 800Mhz G4;Sam400ep 666Mhz;
AmigaOne X-1000 1.8Ghz PA6T-1682M

Quote:

How come it's still telling me 'No Catweasel detected'?

Stupid question, but do you actually have one? If yes, what does the "PCI" command show?

Quote:

And the instructions for the booting the update CD-ROM didn't work for me ('diskboot 500000 0:0 0'). I had to leave off the final zero before it would boot.

The instructions say that if your current U-Boot is from before February 2005, you have to leave the zero off. Only from this update on will you need to add the zero.

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

I could probably find the answer on the site, but I cannot look now.

How do you install the slb? There are no instuctions in the readme

Thanks

Quote:

Poster: Rogue Date: 5-Mar-2005 13:03:14 Quote: How come it's still telling me 'No Catweasel detected'? Stupid question, but do you actually have one? If yes, what does the "PCI" command show?

Not a stupid question as it appears I only implied I had a Catweasel Mark IV, but explicitly yes I do have a Catweasel IV. And, sorry, but "PCI" command? I can't find any "PCI" command. But here are the results from the PCIScan utility:

## Vendor Device Vendor name Description
--------------------------------------------------------------------------------
01 0x10CC 0x0660 Unknown Unknown
02 0x10CC 0x0661 Unknown Unknown
03 0x10B7 0x9200 3Com Corporation 3C905C-TX Fast EtherLink for PC Management NIC
04 0x1106 0x0686 VIA Technologies Inc VT82C686/686A/686B PCI-to-ISA bridge
05 0x1106 0x0571 VIA Technologies Inc VT82C586/596/686 PCI IDE Controller
06 0x1106 0x3038 VIA Technologies Inc VT83C572 PCI USB Controller
07 0x1106 0x3038 VIA Technologies Inc VT83C572 PCI USB Controller
08 0x1106 0x3057 VIA Technologies Inc VT82C686A ACPI Power Management Controller
09 0x1106 0x3058 VIA Technologies Inc VT82C686A/B AC97 Audio Codec
10 0x1106 0x3068 VIA Technologies Inc VT82C686/686A/686B AC97 Modem Codec
11 0x1102 0x0002 Creative Labs EMU10000 Sound Blaster Live! (Also Live! 5.1)
12 0x1102 0x7002 Creative Labs EMU10000 Game Port
13 0x1000 0x000F LSI Logic 53C875/875E/876/876E PCI to Ultra SCSI I/O Processor
14 0x1002 0x5159 ATI Technologies RV100 Radeon 7000 / Radeon VE

Quote:

Quote: And the instructions for the booting the update CD-ROM didn't work for me ('diskboot 500000 0:0 0'). I had to leave off the final zero before it would boot. The instructions say that if your current U-Boot is from before February 2005, you have to leave the zero off. Only from this update on will you need to add the zero.

OK, sorry, I did mis-read the instructions.

Last edited by Valiant on 05-Mar-2005 at 09:36 PM.

_________________
--
-=#Val#=-
Valiant@Camelot


Amiga 1000; Amiga 2000; Amiga 3000T; CD-TV; CD32;
AmigaOne-XE 800Mhz G4;Sam400ep 666Mhz;
AmigaOne X-1000 1.8Ghz PA6T-1682M

@rinaldo00

Just copy the slb to your L dir

The open Media Toolbox select Edit RDB. Then Install AmigaOne booter (slb_v2)

_________________

@Valiant

Quote:

And, sorry, but "PCI" command? I can't find any "PCI" command.

In U-Boot, not OS4.

@Rogue
Update works nicely here, keep up the good work.

Chris

_________________
"Miracles we do at once, the impossible takes a little longer" - AJS on Hyperion
Avatar is Tabitha by Eric W Schwartz

@all

Thank you Hyperion! Everything worked well! Flashed without a problem!
This time I didn't had to use my MAC to burn the ISO CD!
Everything was done with my A1:
image download (IBrowse)
ISO imae bruning (MakeCD)
flashed (A1 )
Reboot

Even all the settings remained! in the ROM!

Great work!

Now get this AOS4 update 3 ready for downloading!

_________________
A computerworld without MS products and Windows!
Connect your Amigas ...
...The Red ONE-A1XE G4 - A3000T- A3000 - A4000 - A2500- A1000 - A600 - CDTV - CD32...
and your PDAs and laptops ...
Psion 5mx Pro - Psion NetBook - Apple iPhone - MacBook Pro

Installed and had to look a bit the preferences because of my SIL card.
Works now. But the new SLB offers quite a long countdown for choosing OS4- normal
and OS4-debug. Is the SLB's countdown time adjustable?

Marko

Quote:

But here are the results from the PCIScan utility:

The controller doesn't seem to appear. Make sure the card is properly seated.

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

@blmara

There's a boot delay option in UBoot for that.

Last edited by mtreasure on 05-Mar-2005 at 10:11 PM.
Last edited by mtreasure on 05-Mar-2005 at 10:10 PM.

_________________


AmigaOne XE-G4, 512MB RAM (AmigaOS 4.1)
Radeon 9250, Terratec Aureon 5.1
CDRW, DVDRW, SII0680

@mtreasure

I mean the countdown of SLB (at least I get 20 sec delay unless I press Enter). It's after the
UBoot phase.

Marko

@blmara
Menu -> Amigamultiboot -> change wait time.

@Rogue
Can i make 2 different OS4 installations and have both in the menu?

_________________
ikir

@ikir

Thanks, that did it!

Marko

@ikir

Quote:

Can i make 2 different OS4 installations and have both in the menu?

Yep, check out the kicklayout file and the information on www.intuitionbase.com

_________________
"Miracles we do at once, the impossible takes a little longer" - AJS on Hyperion
Avatar is Tabitha by Eric W Schwartz

Tanks for the slb2 bootmenu, and timeout settings

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS