@CygnusEd

Thanks, that was it, I didn't see the tools-archive but it's installed and working fine

There is a problem with the width of the amicygnix screen : just use the calendar (right-down the screen).

Or move the screen (but other than vertical move) with the drag bar.


By the way thanks and it's already really faster than V1.

Last edited by ShadowSun on 22-Jun-2012 at 07:11 AM.

Edgar, you rule man! Awesome!

@Kicko

As tommysammy said, the next release will be Gimp 2.6.11. The port is finished and I'm working on the packages.
Gimp 2.8 should be possible, but it will need some time. Some dependencies are not solved yet. And there is another problem. Gimp 2.8 make intensive use of the new GEGL library. GEGL is extremely slow - you will see it in Gimp 2.6. It is optionally used there for some operations.


@ShadowSun

Quote:

There is a problem with the width of the amicygnix screen : just use the calendar (right-down the screen). Or move the screen (but other than vertical move) with the drag bar.

What is the resolution you're using? Can you make a screenshot of this problem?

_________________
X-5000 PPC 5020/2 GHZ, Fractal Define XL R2-Tower, OS 4.1 final update 2, 4 GB, Radeon HD 7770, ESI Juli@ XTe
SAM 460ex/1,15 GHZ, OS 4.1 final, 2 GB, Radeon HD 6450
Amiga 4000D/040 25 Mhz, OS 3.9 BB2, 272 MB, X-Surf, 250 MB ZIP

Just curious, is all this quite fast on an A1-X1000?

_________________
A1200/020+68882 - 6 MB RAM - AmigaOS 3.0

Home Recording Audio

@CygnusEd
Quote:

Please report problems to the author of the program "Michael Christoph" (http://meicky-soft.de).

I'll let him know. It's a minor issue that should be easy to resolve. I'm doing a fresh install of all AmiCygnix packages and haven't found any other problems. Thanks for the hard work. AmiCygnix is a "must-have" Amiga application.

_________________
X1000 with 2GB memory & OS4.1FE

I have downloaded both the base and tools and installed, I have to say very impressed, runs on a better screen resolution (1920 x 1080) and seems much faster.

Thank you for all the hard work, much appreciated

_________________
SAM 460 with 2GB or RAM, 1000GB HD, 4 port SATA, DVDRW drive and Radeon HD 4650 GFX card.

@all

The update seems to work well so far. Good news for me
But don't be afraid to tell me any problem.

_________________
X-5000 PPC 5020/2 GHZ, Fractal Define XL R2-Tower, OS 4.1 final update 2, 4 GB, Radeon HD 7770, ESI Juli@ XTe
SAM 460ex/1,15 GHZ, OS 4.1 final, 2 GB, Radeon HD 6450
Amiga 4000D/040 25 Mhz, OS 3.9 BB2, 272 MB, X-Surf, 250 MB ZIP

Will there be a version that installs without having the AmigaOS SDK installed?
I am getting an "SDK:" -error, when trying to install...

@Nicsoft

The AmiCygnix package has only a few dependencies to the SDK. Some very few perl scripts are included, which are using the perl interpreter of the SDK. The second is the included binary of the abc-shell "sh", which may want to try to access data in the SDK.
The only part in the installer script where the abc-shell is used, is the initialisation of the MIME settings. So I guess it happens there?

Please check your PATH variable with "getenv PATH" in a shell. Maybe there is a path included starting with "/SDK"?

Basically I need to know, at which part of the installation procedure the problem occurs.

_________________
X-5000 PPC 5020/2 GHZ, Fractal Define XL R2-Tower, OS 4.1 final update 2, 4 GB, Radeon HD 7770, ESI Juli@ XTe
SAM 460ex/1,15 GHZ, OS 4.1 final, 2 GB, Radeon HD 6450
Amiga 4000D/040 25 Mhz, OS 3.9 BB2, 272 MB, X-Surf, 250 MB ZIP

@CygnusEd

I've sent some screenshots and the install_log_file to your email address...

@Nicsoft

Thanks for the screenshots! Now it is clear.
As I thought, it is a problem of the abc-shell and it happens while initialisation of the MIME data.
Can you make a log file with Snoopy, so I can see what the abc-shell wants to access? Snoopy is available on OS4-depot.
I suggest to use the expert mode while installation and to start Snoopy after copying the "Install-Archive" drawer.

Thanks!

_________________
X-5000 PPC 5020/2 GHZ, Fractal Define XL R2-Tower, OS 4.1 final update 2, 4 GB, Radeon HD 7770, ESI Juli@ XTe
SAM 460ex/1,15 GHZ, OS 4.1 final, 2 GB, Radeon HD 6450
Amiga 4000D/040 25 Mhz, OS 3.9 BB2, 272 MB, X-Surf, 250 MB ZIP

Hi,

I have a problem but I'm not sure it's since the 1.1 installation... I can't quit, the Shutdown and Quit in the pull down menu do nothing, I had to RESET myn A1, anyone have this problem?

Thank you.

@Pierre55

Quote:

I have a problem but I'm not sure it's since the 1.1 installation... I can't quit, the Shutdown and Quit in the pull down menu do nothing, I had to RESET myn A1, anyone have this problem?

Did you double-click the 'Shutdown' icon?

_________________
SAM 460 with 2GB or RAM, 1000GB HD, 4 port SATA, DVDRW drive and Radeon HD 4650 GFX card.

Edgar has replied by email and he gave me instructions how to solve the problem!

I was told to launch these commands in a shell.

"SetEnv HISTFILE /Cygnix/CygnixPPC/var/abc-shell/history"

"SetEnv ENV /Cygnix/CygnixPPC/var/abc-shell/variables"

"SetEnv PATH /Cygnix/CygnixPPC/gtk2.24/bin:/Cygnix/CygnixPPC/bin:/Cygnix/CygnixPPC/X11R6.3/bin:/C"

Then (again) run the Installer (Base-installation)...
Now it worked flawlessly!

But the same problem that Pierre55 had, occurred. AmiCygnix wouldn't quit!
The solution was to reboot and install the Tools-installation. Now Quit among other things works as supposed to...

Last edited by Nicsoft on 25-Jun-2012 at 12:40 AM.

Hi,

Maybe I missed something because still can't quit after doing what you explained, should I change to AmiCygnix directory because doing the commands?

While I installed the base program I have a requester asking for the SH files, I did the assign to SDK/c.

Thank you

@Pierre55, @CygnusEd, @Nicsoft

Quote:

I have a problem but I'm not sure it's since the 1.1 installation... I can't quit, the Shutdown and Quit in the pull down menu do nothing, I had to RESET myn A1, anyone have this problem?

I have this same problem and I installed the tools package as well. I installed 1.1 on top of the old installation. (I have SDK installed.)

@Pierre55
You don't have to reset your machine. Open Amiga Shell on Workbench and type Status command. Then check what process number you have in front of ../../XGeekPPC and type Break command and that number. That will kill X11 server/AmiCygnix.

Last edited by Tomppeli on 25-Jun-2012 at 05:03 PM.

_________________
Rock lobster bit me. My Workbench has always preferences. X1000 + AmigaOS4.1 FE
"Anyone can build a fast CPU. The trick is to build a fast system." -Seymour Cray

@Pierre55 @Tomppeli

Well, I did a "clean" new installation. Not an update.
Therefore the need of the commands from Edgar (CygnusEd).

Your problems seems to be update-related (1.0-1.1)!?

Let's see what Edgar can come up with...

@Pierre55

Quote:

Maybe I missed something because still can't quit after doing what you explained, should I change to AmiCygnix directory because doing the commands? While I installed the base program I have a requester asking for the SH files, I did the assign to SDK/c.

The solution posted in #35 is only to fix the problem while installation. If a requester appeared asking for "SDK:", you need this solution or you wait for a fixed package I want to release.

I'm also working on the shutdown problem. I've found already a problem and I need someone to test it. Do you like to test it or anybody else?

Last edited by CygnusEd on 25-Jun-2012 at 05:40 PM.

_________________
X-5000 PPC 5020/2 GHZ, Fractal Define XL R2-Tower, OS 4.1 final update 2, 4 GB, Radeon HD 7770, ESI Juli@ XTe
SAM 460ex/1,15 GHZ, OS 4.1 final, 2 GB, Radeon HD 6450
Amiga 4000D/040 25 Mhz, OS 3.9 BB2, 272 MB, X-Surf, 250 MB ZIP

@CygnusEd

Hi.

Sure I can test this for you...

Bye!