ScanJuggler XAGA: New scandoubler and flickerfixer for A1200/A4000
Date 22-Dec-2012 20:24:11
Topic: hardware Classic
| A ScanJuggler XAGA is a scandoubler (Lite) and flickerfixer for some Amiga models equipped with AGA chipset.
Read more --->
ScanJuggler XAGA Lite (rev.2)
Scandoubler for A1200 and A4000(D) machines.
When fitted inside an A1200, it fits below the HDD frame and among other add-on cards.
Max. resolution: 768x580
Color depth: 24/21 bit (depending on color mode)
PAL/NTSC/Euro36 compatible
Slightly reduce interlace blinking
Supports Productivity/Euro72/DBLxxx screen modes
Supports border blanking
DDC/CI support (software is in development)
Other special extras (to be announced)
Analogue VGA output
Est. availability: Q1 2013.
Price: international price to be announced
ScanJuggler XAGA
Scandoubler and Flickerfixer for A1200 and A4000(D) machines.
When fitted inside an A1200, it fits below the HDD frame and among other add-on cards.
Max. resolutions, eg.:
PAL: 1536x580 (SHiRes support)
Custom screen modes: 1280x600, 1024x768
Color depth: 24 bit
PAL/NTSC/Euro36 compatible
Supports Productivity/Euro72/DBLxxx screen modes
Supports border blanking
DDC/CI support (software is in development)
Other special extras (to be announced)
DVI-I output (analogue VGA and HDMI possible with a passive adapter)
Est. availability: Q1 2013.
Price: international price to be announced
Connectors
Default connector
ScanJuggler comes with a VGA connector by default:
The small add-on on the left fits both into A1200 and A4000. In A1200 it fits together with for example the ELBOX KEY V2.0 and of course the HDD frame. In case of A4000 it doesn't collide with the card put in the lowest slot. The connector has a button, which you can use to control the SJ. This connector doesn't support DDC/CI.
 
Extra connector
The Switcher Module is an extra add-on for the ScanJuggler. It fits below the floppy in an A1200, or into a slot-backplate in an A4000.
It connects to the SJ with a shielded cable and it also has an input connector to for your BVision or CVision. Switching between the inputs is automatic or can be controlled with a button on the module. The button is also used to control other functionality of the SJ. This connector supports DDC/CI.
Price: international price to be announced
Ordering
Additional information is available and pre-ordering is possible via e-mail: scanjuggler-at-gmail-dot-com
Source: http://wiki.amigaspirit.hu/index.php/ScanJuggler_en
|
|