Introducing Sam460ex

Date 2-Apr-2010 20:47:35
Topic: Hardware News

Bassano del Grappa, Italy - 2 April 2010

ACube Systems is happy to announce the new Sam460ex board. This board will join the Sam family together with the Sam440ep-flex.
Based around the AMCC 460ex SoC, the board offers many modern features like: PCI express slots, SATA2 port, Giga Ethernet, DDR2 RAM.

This is the complete features list:

flex-ATX form factor (21.6 x 17 cm)
8 layers PCB
AMCC 460ex SoC – upto 1.066 Ghz
max 2 GB DDR2 Ram – 200-pin SODIMM up to 533 Mhz
Silicon Motion SM502 embedded MoC (audio/video) max 64Mb Gfx RAM
Audio 5.1 Realtek ALC655 codec
PCI-express 4x lanes slot (16x mechanical connector)
PCI-express 1x lane slot (* check notes below)
PCI slot, 32 bit, 66/33 Mhz, 3.3V
1x SATA2 port (* see notes below)
6x USB2 EHCI/OHCI ports
2x 10/100/1000 Ethernet ports
Lattice XP2 FPGA with 80 I/O pins expansion connector (optional)
UMTS/GSM module (optional requires add-on card)
512 MB NAND Flash (optional)
integrated SD card reader
RTC clock
Serial port, 8-wires
I2C and SPI/I2C buses
passive cooling
U-Boot 2009.08

Notes: the SATA2 port and the PCI-e 1x slot are mutually exclusive, only one of them can be used at a time.

Price: the exact price will be announced when the board is available to the user (due the varying USD / EURO exchange rate) it will be in the range of EUR 600 - 650. The board will NOT replace the Sam440ex-flex board.

More information on:

ACube Website
Sam4x0 website

This article comes from AmigaWorld - Amiga Community Portal

The URL for this story is: