All

If you have a Radeon in your AmigaOne please click here and enter your details.

If you don't have an account, please post your details in this thread instead.

NB: If you already posted over at Amigans.net, please don't duplicate here.

Original post follows for reference.

Quote:

All As per this post, if you are using a Radeon card in your AmigaOne, please can you reply in this thread with: 1. PCIScan line for your card. 2. Whether or not you are using interrupts (copy and paste the INTERRUPT tooltype of DEVS:Monitors/Radeon) 3. Any other Radeon card config details. 4. Amiga model 5. NEW: If interrupts are off, why! Here is mine to get the ball rolling: 1. 15 0x1002 0x5159 ATI Technologies RV100 Radeon 7000 / Radeon VE 2. No Interrupts 3. A-Tek Radeon 7000 64MB dual-head card 4. AmigaOne G4-XE 5. OS4 does not boot past Kickstart with interrupts enabled

Last edited by Chris_Y on 29-Apr-2007 at 09:13 AM.
Last edited by Chris_Y on 23-Apr-2007 at 07:56 AM.

_________________
"Miracles we do at once, the impossible takes a little longer" - AJS on Hyperion
Avatar is Tabitha by Eric W Schwartz

@Chris_Y

I have an A1-XE G4/7455@933, 512MB RAM.
Sapphire Radeon 9250 256MB

15 0x1002 0x5960 ATI Technologies Inc RV280 [Radeon 9200 PRO]
16 0x1002 0x5940 ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary)

INTERRUPT=Yes

_________________
- Don't get fooled by my avatar, I'm not like that (anymore, mostly... maybe only sometimes)
> Amiga Classic and OS4 developer for OnyxSoft.

@Chris_Y

Ok, here is mine:

1:
Vendor: 0x1002 (ATI Technologies Inc)
Device: 0x5159 (Radeon RV100 QY [Radeon 7000/VE])
Class code: 0x030000
RevisionID: 0x00

2: Interrupt=yes
3: Xpert Vision Radeon 7000 32MB TV-out 4xAGP
4: AmigaOne G3SE

Regards Richard.

@Chris_Y

AmigaOne XE/G3

12 0x1002 0x5960 ATI Technologies RV280 Radeon 9200 Pro
13 0x1002 0x5940 ATI Technologies RV280 Radeon 9200 Pro - Secondary
ITERRUPT=No

It's a Radeon 9250. Dunno why i get that secondary entry.

Woops... wrong thread.

Pasteing in the real oner.

Last edited by spotUP on 22-Apr-2007 at 06:52 PM.
Last edited by spotUP on 22-Apr-2007 at 06:51 PM.

_________________
AOS4 Betatester, Peg2, G4@1ghz, Radeon 9250 256mb, 1gb RAM.

http://www.asciiarena.com
http://www.uprough.net

13 0x1002 0x5961 ATI Technologies Inc RV280 [Radeon 9200]
14 0x1002 0x5941 ATI Technologies Inc RV280 [Radeon 9200] (Secondary)

INTERUPT=YES

PowerColor ATI Radeon 9200 VIVO 128 MB

A1XE G4@800

@Chris_Y

13 0x1002 0x5960 ATI Technologies Inc RV280 [Radeon 9200 PRO]
14 0x1002 0x5940 ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary)
INTERRUPT=Yes
Sapphire ATI Radeon 9250 128MB
AmigaOne XE G4 800MHz

Bye,
Fabio

@Chris_Y

It'd be nice to know what the purpose of this call for info is.

Thanks,
Firbodi

_________________
MicroA1 G3, 512MB RAM, DVD-RW; and A1-SE G3,512MB RAM, CD-RW & DVD-ROM
Avatar: Perspolis, Capital of Achaemenid Empire 500 B.C.

0x1002 0x5961 ATI Technologies Inc RV280 [Radeon 9200]

INTERRUPT=Yes

Radeon 9200SE 128Mb

A1XE-G3 512MB RAM

@Chris_Y
12 0x1002 0x5159 ATI Technologies Inc. Radeon RV100 QY (Radeon 7000/VE
dont know with the interupt but in tooltypes its off


Tell me something do you develope web on Amiga, then whats the prg you use...




Amiga RuleZ

@firbodi

I concur. What is the purpose of this ?

@nottins

Quote:

What is the purpose of this ?

There is a thread 'in another place' which quotes:

"Some users have reported problems with certain Radeon cards and the use of interrupts"

@RedMelons
Quote:

"Some users have reported problems with certain Radeon cards and the use of interrupts"

That's right, it's to gather information on which cards are not working with interrupts.

@flex-shiva
Quote:

Tell me something do you develope web on Amiga, then whats the prg you use...

That's a random question and somewhat off-topic, but I just use Notepad on OS4.

Chris

_________________
"Miracles we do at once, the impossible takes a little longer" - AJS on Hyperion
Avatar is Tabitha by Eric W Schwartz

@Chris_Y

Pardon me Chris, but I have looked at the thread on amigans and see people spelling this tooltype:
"Interrupt"
"Interrupts"
"Iterrupt"
etc.
I also see reference to:
"yes"
"on"
"enabled"
etc.

I suggest you demand a straight cut/paste from radeon tooltypes into people's posts, since mispelling here could lead you to the wrong conclusion.

#6

_________________
This posting, in its entirety, represents solely the perspective of the author.
*Secrecy has served us so well*

@Chris_Y

1). 15 0x1002 0x5940 ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary)
2). INTERRUPT=Yes
3). ATI Saphire 9250 256MB
4). AmigaONE G4-XE

Last edited by raumfahre on 22-Apr-2007 at 11:45 PM.

@Chris_Y

I have a MicroA1 (µA1-C) with IBM PowerPC 750 GX CPU and 256 MB RAM
and standard onboard Radeon 7000 with 32 MB RAM.

12 0x1002 0x5159 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

(INTERRUPT=Yes) ..... I assume this is the same as INTERRUPT=No


Here is the pciscan info ...

1.RAM Disk:> pciscan
## Vendor Device Vendor name Description
01 0x10CC 0x0660 Mai Logic Incorporated Articia S Host Bridge
02 0x10CC 0x0661 Mai Logic Incorporated Articia S PCI Bridge
03 0x13F6 0x0111 C-Media Electronics Inc CM8738
04 0x10B7 0x9200 3Com Corporation 3c905C-TX/TX-M [Tornado]
05 0x1106 0x0686 VIA Technologies, Inc. VT82C686 [Apollo Super South]
06 0x1106 0x0571 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
07 0x1106 0x3038 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
08 0x1106 0x3038 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
09 0x1106 0x3057 VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
10 0x1106 0x3058 VIA Technologies, Inc. VT82C686 AC97 Audio Controller
11 0x1106 0x3068 VIA Technologies, Inc. AC'97 Modem Controller
12 0x1002 0x5159 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
1.RAM Disk:>


Here is the tooltypes info from DEVS:Monitors/Radeon ...

BOARDTYPE=Radeon
CMPLENGTH=6
(BORDERBLANK=Yes)
(BIGSPRITE=Yes)
(SOFTSPRITE=Yes)
IGNOREMASK=Yes
(DISPLAYCHAIN=Yes)
FAKENATIVEMODES=No
VSYNCMIN=60
VSYNCMAX=75
HSYNCMIN=31500
HSYNCMAX=57000
MODE=640x480@75
MODE=800x600@75
MODE=1024x768@70
(INTERRUPT=Yes)


---
redfox

-- edit as per request from Chris_Y --

I do not run my MicroA1 on a 24/7 basis. Instead, I power it on when I go to use it and power it off when I am done. After I upgraded to OS4 Final update, the machine would randomly boot into a black screen on power-up, no Workbench, just black. Then I would do a ctrl alt alt reset and the machine would reboot and launch Workbench normally. At first I thought this was somehow related to network interface activities. Then I saw some threads describing this trouble, and the guys were discussing Radeon tooltypes settings.

On power-up, the machine would randomly boot into a black screen (i.e. no Workbench) ...
... solved Feb 3, 2007 by changing INTERRUPT=Yes to (INTERRUPT=Yes)

The black screen has not returned since I changed this setting.

Last edited by redfox on 29-Apr-2007 at 02:35 PM.
Last edited by redfox on 23-Apr-2007 at 01:24 AM.

@redfox

Quote:

(INTERRUPT=Yes) ..... I assume this is the same as INTERRUPT=No

Correct.
"commented out" is NO.
Just like a mispelling of either the tooltype name or setting would be.

#6

_________________
This posting, in its entirety, represents solely the perspective of the author.
*Secrecy has served us so well*

@Chris_Y

Here's mine:

1) 0x1002 0x5159 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

2) INTERRUPT=Yes

3) SOFTSPRITE=No, "Evil Wizard", 64MB

4) AmigaOne G4-XE

I also own a Radeon 9200 but it's not currently installed.

_________________
'unfixed' A1XE, 512mb RAM, plug-in USB card, Sil 0680 IDE card, Radeon 9250, built-in sound, OS4.1 update 5.

@Chris_Y

13 0x1002 0x5961 ATI Technologies RV280LE-8X ATI RADEON 9200
14 0x1002 0x5941 ATI Technologies RV280 ATI Radeon 9200 - Secondary

INTERRUPT=Yes

A1 XE G3 1GB

Rex

@Chris_Y

Her's mine from a Micro::

8.RAM Disk:> pciscan
## Vendor Device Vendor name Description
01 0x10CC 0x0660 Mai Logic Incorporated Articia S Host Bridge
02 0x10CC 0x0661 Mai Logic Incorporated Articia S PCI Bridge
03 0x13F6 0x0111 C-Media Electronics Inc CM8738
04 0x10B7 0x9200 3Com Corporation 3c905C-TX/TX-M [Tornado]
05 0x1106 0x0686 VIA Technologies, Inc. VT82C686 [Apollo Super South]
06 0x1106 0x0571 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
07 0x1106 0x3038 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
08 0x1106 0x3038 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
09 0x1106 0x3057 VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
10 0x1106 0x3058 VIA Technologies, Inc. VT82C686 AC97 Audio Controller
11 0x1106 0x3068 VIA Technologies, Inc. AC'97 Modem Controller
12 0x1000 0x0001 LSI Logic / Symbios Log 53c810
13 0x1002 0x5159 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]

BOARDTYPE=Radeon
CMPLENGTH=6
(BORDERBLANK=Yes)
(BIGSPRITE=Yes)
(SOFTSPRITE=Yes)
IGNOREMASK=Yes
(DISPLAYCHAIN=Yes)
FAKENATIVEMODES=No
;Default settings:
;VSYNCMIN=60
;VSYNCMAX=85
;HSYNCMIN=31500
;HSYNCMAX=64000
;MODE=640x480@85
;MODE=800x600@75
;MODE=1024x768@72
;MODE=1280x1024@60
(INTERRUPT=Yes)
;Philips monitor type 109S: H = 30 - 92kHz, V = 50 - 160 Hz, 234MHz
VSYNCMIN=50
VSYNCMAX=160
HSYNCMIN=30000
HSYNCMAX=92000
MODE=1152x864@72
MODE=1280x1024@85
MODE=1440x1080@65
MODE=1500x1125@65
MODE=1600x1200@65
MODE=1920x1440@50

OldFart

_________________
Life is a waste of time.
Time is a waste of life.
Get wasted all the time
and you'll have the time of your life!

@Chris_Y

1. 0x1002 0x5159 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
2. Interrupt=YES
3. Sorry if I misunderstood but here's my tooltypes:
BOARDTYPE=Radeon
CMPLENGTH=6
IGNOREMASK=Yes
FAKENATIVEMODES=No
VSYNCMIN=60
VSYNCMAX=75
HSYNCMIN=31500
HSYNCMAX=48000
MODE=640x480@75
MODE=800x600@72
MODE=1024x768@60
INTERRUPT=Yes
4. AmigaOne G4-SE 800 MHz

Thanks for your work!

Nathan