Hello people!

Well I am not sure but yesterday when I burned a DVD with 11 games for FPSE on the workbench it doesn't appear any volume of the new DVD.

When I reset to U-Boot, the DVD on unit 1 was shown with 4320 MB aproximately but don't know why isn't recognizable.

I burned with Frying Pan 1.2.3 selecting the drive,the Playstation image files to put on the
DVD and writing to the DVD.And enabled the flag close disc too.

So what I am doing wrong?

Can I burn a PSX DVD to use with the spectacular FPSE emulator?

I am very interested on this topic.

I'll stay tuned for your answers

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Is anybody out there?

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

Say NO to Piracy!

_________________
Men who have girlies in their avatars are Girliemen!

@Darth_X

Yeah say no to piracy.

Can you answer my question?

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

What filesystem was the DVD burnt with?

For example, DVD can be burnt as ISO, UDF, a UFD-ISO hybrid.

If the Filesystem of your machine doesn't support UDF and you have burnt the disk in that form, then there is every probability that it will not been seen properly in WB although the disk will be "full".

If you have a PC with a DVD drive (running XP or higher), check that it shows up in that and that it is readable.

DVDs burnt using an ISO format are more compatible especially if the files burnt are under 2GB in size. You really only need to use UDF if you have a file that is larger than 2GB to burn to the disk.

_________________
Test sig (new)

@_Steve_

Quote:

_Steve_ wrote: @newlight What filesystem was the DVD burnt with? For example, DVD can be burnt as ISO, UDF, a UFD-ISO hybrid. If the Filesystem of your machine doesn't support UDF and you have burnt the disk in that form, then there is every probability that it will not been seen properly in WB although the disk will be "full". If you have a PC with a DVD drive (running XP or higher), check that it shows up in that and that it is readable. DVDs burnt using an ISO format are more compatible especially if the files burnt are under 2GB in size. You really only need to use UDF if you have a file that is larger than 2GB to burn to the disk.

The DVD was burnt with the Amiga Fylesystem selected on the lower right tab of Frying Pan 1.2.3.I suppose that was an ISO type of filesystem right?

What types of filesystems are choosable with Frying Pan and AmiDVD?

And waht of them are compatible to make happily my PSX DVD to run on FPSE?

Good to see some serious response here.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@newlight

My problem is that I have 3 parttions of the HD really full or at half fullfilled on quite large parttitions in best cases with Playstation games and I have to burn and delete them to free some space on my HD.

Can you answer the question on the previous post about what fylesystem to choose on Frying Pan or AmiDVD and how to choose it?

Help is really appreciated.

Last edited by newlight on 19-Mar-2009 at 12:44 PM.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER