Hi

I got a problem with my SAM trying to enable the keyboard I hava with no right win key. I entered in the ubood variable setting and I was able to set the variable norwin to make my keyboard working properly.
The problem is that after this modification, I don't know why, it has been set to boot from dvd only (option 440 sata dvd). Each yime I change the booot to 440 Sata HD, the system boot properly, but once only. This is quite annoying. This because the option save this new configuration does not save it an I have to repeat it each time.
I try to reinstall update 1,3,1d but nothing.
Once I get the prompt, despite the fact that before I set the HD, the saveenv command save anyway the dvd option.

Any suggest

ciao

Last edited by ilbarbax on 22-Feb-2012 at 08:57 PM.
Last edited by ilbarbax on 22-Feb-2012 at 08:57 PM.

@ilbarbax

once you boot to Workbench open a cli and check your Uboot Settings using the
nvgetvar command .

the ones that affect booting should look like the following

boot1=s4siicdrom
boot2=s4sii
sii3114ide_conf=1002

you can set them from the same cli by using the nvsetvar command.
the third one may be what is causing your problem .

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@Spectre660

FIXED many thanks