I have to stop for trying Amiblitz3 to work perfectly. I am fed up have freeze after each test of blitz program. Just one had work until now "3dcube".Sometimes i need such or such library or file, i think paths are wrong, but anyway on my winuae Amiblitz is too unstable. Probably it isn't Amiblitz fault, sure my winuae configuration but it is too boring to find wich one works great.I know it works perfectly for plenty of users but for me, it doesn't. Maybe if i was on Aros os, i shall try later when i shall buy one ares. Thans for your help

@Alexfrench

Well, it most probably is something with your particular setup that's causing your issues. However, AmiBlitz is 68k only, so will not run on x86 Aros without some sort of UAE, which is no better than where you are now.

One key thing I would check though is to make sure your UAE setup is set to use an FPU as it seems that a number of internal commands require one and simply crash if it's not present.

_________________
RobTheNerd.com | InstallerGen | SMBMounter | Atoms-X

@Daedalus

i am on Winuae 2.4.1, fpu 68882 is selected, but .....
too much things to checked, it doesn't matter ...

@Alexfrench

remove the FPU.

I let other explain to you if the use of the debugger of amiblitz is possible with UAE.

Amiblitz is originally programmed with UAE on a PC.

Last edited by Mrodfr on 05-Jun-2012 at 05:39 PM.
Last edited by Mrodfr on 05-Jun-2012 at 05:39 PM.

_________________
BTW, what you have done for the amiga today ????

-A1200+Mediator+VooDoo3+060/50+96mo+SCSI-KIT
-SAM440EP-667mhz-on MapowerKC3000+AOS4.1

Amiga Docs Disks Preservation Project

@Alexfrench

I would strongly recommend visiting amiforce.de, they have got an english Amiblitz forum, and the Amiblitz Pros will help you right away... However I use Amiblitz 3.5 on a frequent basis under WinUAE as well. Drop me a mail, and I'll sent you my winuae settings etc... however I am not using the newest AmiBlitz3.5 but mine works well.

birkenfeld /at\ geobiz point de

_________________
Geomarketing at
www.geobiz.de
www.gebietsplanung.net
www.geomarketing-consultant.de

@Mrodfr

Hello !
With the 68882 fpu removed i get "Amiblitz3_beta Program failed (error #80000000B)
with the fpu 68881 on, less breakdown but still messages like missing library zlib.library v3.2+.
i've checked library drawer and there is an zlib.library 3.2.
I've remove debugger option too.
Thanks

@gerograph

Hello !
ok i will try to read amiforce page, some pages are in english but also in german as the register page for example.
I am fighting myself with amiblitz3, and now i should be pleased if you send me your winuae settings withe the hope to resolve my problems.
Mine come from ClassicWB_P96, maybe is it a cause ?
Thanks