@TrevorDick

Quote:

See my PM re X-Surf problems.

Noooo ! Reply in the thread please!

I have an X-Surf and have received my OS4 today, so will be undertaking installation tonight or tomorrow.

I'd like to know about any potential problems (and how to resolve them) before I try.

Thanks,

Chris.

@IanO

Quote:

Not good news then for Mediator Lt owners so a good job my Bvison came to the rescue. I though the the only difference was that the LT version had 2 less PCI slots and an AT power interface but seem not the case as far as OS 4.0 is concerned.

My documentation only listed a number of Mediator Vendor/Product ID's, and it seems yours wasn't in it. I can try building a new kernel with the ID's added, please contact me privately via EMail (Hans-JoergF@hyperion-entertainment.biz).

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

@Hans


Quote:

Just out of interest, have you tried installing the mediator's own 68k drivers?

The thought about the Elbox drivers did cross my mind however Rogue has posted on the topic so i'll hang fire and see if a revised kernel resolves the problem.

Ian

_________________
Member of Midland Amiga Group (MAG)

@All

It's great to hear more and more people are getting and installing OS4

Way to go dudes.....wish I could join the party right now!

Emotions.....we want EMOTIONS!!!!

_________________
On Planet Boing Trevor is God

@Hondo

Quote:

Emotions.....we want EMOTIONS!!!!

You had it coming

And a big to the new OS4 users!

_________________
AlexC's free OS4 software collection

AmigaOne XE/X1000/X5000/UAE-PPC OS4 laptop/X-10 Home Automation

Well it was the space bar to get to the 15khz.
Thanks all.

Up and running on a TV but not my monitor.
No PCI cards found.

Using a Mediator.
Should I be using the Mediator install disk at all?

_________________
If your nose runs and your feet smell, you're upside down.

My install went to h....!!

I get nothing on my screen when booting from the floppy/CD, it boots perfectly from the CD after being started by the floppy and I can hear my monitor "pop" as it does when I gets output from a gfx card but it's like the signal is out of range so the screen remains black


Maybe my PIcasso IV gfx card is a bit rusty and is not up the the job

Last edited by Amigaz on 08-Dec-2007 at 10:22 AM.

_________________
A4000 CSMKII 50mhz
A4000 CS PPC 604e@233mhz '060@50mhz
A3000 '040@40mhz
A1200 '030@50mhz
A500+ '030@40mhz

@Amigaz

Have you tried plugging in a TV to see what is going on?

_________________
If your nose runs and your feet smell, you're upside down.

Quote:

TiredofLife wrote: @Amigaz Have you tried plugging in a TV to see what is going on?

Nope, but gonna plug hook up another monitor to my scandoubler, the scandoubler on my PIV died a month ago :(

Last resort would be to plug in my Cybervision PPC and see if I get any output

_________________
A4000 CSMKII 50mhz
A4000 CS PPC 604e@233mhz '060@50mhz
A3000 '040@40mhz
A1200 '030@50mhz
A500+ '030@40mhz

ok, just tested too see what O got from my scandoubler: these colours switched on my screen, blue, red and pink then the screen went black when my PIV was "activated"

_________________
A4000 CSMKII 50mhz
A4000 CS PPC 604e@233mhz '060@50mhz
A3000 '040@40mhz
A1200 '030@50mhz
A500+ '030@40mhz

@Amigaz

It does that and then after a bit loads up.
At least on the TV anyway.

_________________
If your nose runs and your feet smell, you're upside down.

Quote:

TiredofLife wrote: @Amigaz It does that and then after a bit loads up. At least on the TV anyway.

ahh...so something must be wrong with my PIV then, another project for JJ Boulet @ Amigacenter

arghh..and the CVision PPC won't fit without cutting up the drive cage or removing it

Must fit my CS PPC inside my A4000 mediator system instead

_________________
A4000 CSMKII 50mhz
A4000 CS PPC 604e@233mhz '060@50mhz
A3000 '040@40mhz
A1200 '030@50mhz
A500+ '030@40mhz

@IanO

Did you sort out the Voodoo problem and if so how?

_________________
If your nose runs and your feet smell, you're upside down.

@Rogue

Is this likely to be a problem for other Mediator owners or just a problem with the LT?
Cheers

_________________
If your nose runs and your feet smell, you're upside down.

Loaded the Mediator Systems files for graphics and have now got the use of my monitor.

_________________
If your nose runs and your feet smell, you're upside down.

@Amigaz

Quote:

Must fit my CS PPC inside my A4000 mediator system instead

there exists some drives bays you can mount in the 5" bays have look in your local PC store, or some where on the Internet.

Last edited by NutsAboutAmiga on 08-Dec-2007 at 11:59 AM.

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

@TiredofLife

Quote:

Is this likely to be a problem for other Mediator owners or just a problem with the LT?

It works great on my mediator 4000, and other betatesters used it with their Mediator 1200, so I would guess it is because the LT has a different product ID.

_________________
Playstation Network ID: xeron6

@xeron

I`m using the 1200SX.
Was that tested?

_________________
If your nose runs and your feet smell, you're upside down.

@Hondo

OS4.0 is installing this very moment...everything is working so far, at least Will update here a bit later.

Steve

_________________
A1200T - OS4.0,OS3.9: 603e PPC 200mhz,060 50mhz, 256mb ram, FastATA MK-III, BVision, 160gb,20gb HDDs

A1200 - OS3.1: Blizzard IV 030, 64mb ram, 400mb HDD

OS4.x - Flying the AMIGA flag

Worked fine when I installed Mediator system files and graphic files and then ran the config utlity.
When I just installed the Mediator system files and did no config I could still select the Voodoo card.
Tested a screen mode and worked fine.
Save the screen mode and everything locked up.
Does every time I boot now.

_________________
If your nose runs and your feet smell, you're upside down.