all.
cirrus vga confirmed by me is working .
Amigaos need on thread ripper just 5 seconds to boot from the install cdrom is really much more faster than what was my x5000/40 in booting is impressive.
Now i will try to install all and make some benchmarks this last git is great. Thanks Zoltan and all who make it possible.

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm

I think the kickstart modules are read in PIO mode on the real hardware, DMA should be activated when drivers are loaded.

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

@NutsAboutAmiga

is more faster than was reading from ssd

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

installing FE

start time at 20:47 finsh at 20:53

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm

Well done! I´m looking forward to benchmarks.

@pavlor

wouldnt expect too much. im using sam in qemu all the time here to test aros ppc compiles, also heavier stuff like webkit browsers, and while its responsive, cpu intensive tasks are very sluggish.

edit: it may also have to do with the emulated network hardware, but still..

Last edited by wawa on 10-Jul-2018 at 09:32 PM.

@pavlor

yes you need to wait because after installing i dont have Os4 running because issue with ramlib.
dsi crash because stack error. but os4 is fast on ripper. i can use emulated gpu with gui effects enabled and isnt slow like is fs-uae. i will try a way for have something running for have a benchmark im curious too.

plus there is issue with ram. look like the machine cand have up of 1 Gb of ram. reall sam 460 have 2 gb working.

Last edited by tlosm on 10-Jul-2018 at 11:37 PM.
Last edited by tlosm on 10-Jul-2018 at 11:36 PM.

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm

good thing is it starts now pretty quick really, that makes debugging a bit more convenient. but performance is still the same.

@tlosm

What are you using to attach a disk image to Qemu? I did this:

qemu-img create -f qcow2 sam460.img 120G

and then attached it to the VM with:

-drive file=sam460.img,format=qcow2,id=disk -device ide-hd,drive=disk,bus=ide.0

but whatever kind of partitioning I do, when I save Media Toolbox and reboot, no partitions appear in the Format tool, even though Media Toolbox can still see them (they're all set with Automount).

@cmsj

Dont make to big diskimage try with a smaller one first i did a 10G .
my disk was made like this

qemu-img create sam460.img 10G .

and attached like this -drive file=sam460.img,format=raw,id=disk -device ide-hd,drive=disk,bus=ide.0

but i have to test different disk image format because probably the raw can be what made AmigaOS crashing in ramlib. let me test and report.

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm

I switched to a raw image and I noticed that the BIOS screen now reports the correct capacity of the drive.

I also noticed that the partitions do appear if I use the normal partition type instead of SFS, so that may have been my fault (although why they don't appear just because the type is SFS\02, I don't know).

So, I now have 4.1 installed on a RAW image, but Grim Reaper reports on boot that IPrefs has an 80000004 guru.

Progress at least :D

@cmsj

try standard file system with block size of 512 and format without ffs and no dir cache and no int mode ;.)

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@cmsj

What about just normal SFS or SFS1? SFS2 is 64-bit SFS so more complicated.

@Hypex

I dont know just test the first that make all working. will see other in future.

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

here the rc0 for windowze 64bit



https://qemu.weilnetz.de/w64/2018/qemu-w64-setup-20180711.exe

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm

It doesn't seem to work here: display is stuck with "Guest has not initialized the display (yet).".

Not sure this is related, but I can see that in the terminal:

> (qemu-system-ppc.exe:9644): Gtk-WARNING **: Could not load a pixbuf from /org/gtk/libgtk/theme/Adwaita/assets/bullet-symbolic.svg.
This may indicate that pixbuf loaders or the mime database could not be found.

With the same command line, it starts on Linux & macOS.

Last edited by Leo on 13-Jul-2018 at 03:39 PM.

_________________
http://www.warpdesign.fr/

@tlosm

This afternoon i installed the latest qemu on Windows and got this error:
View Picture

By the way: I successfully compiled the 3.0 qemu on my Mac (macOS Mojave developer beta 3), and was able to install AmigaOS 4.1 FE on a 10GB hardisk-image. What options do i have to choose in Terminal to activate networking? And how can i activate the CLGD in Terminal and AOS? I have both operating systems: Classic and Sam460 AOS 4.1 FE. Maybe you can help

Last words: Thanks for your hard work, developers! Having a Sam460ex emulated on my Mac makes me smile

Last edited by miggymac on 13-Jul-2018 at 06:51 PM.

_________________
All sorts of computer errors are now turning up. You'd be surprised to know the number of doctors who claim they are treating pregnant men. (Isaac Asimov)

AmigaOS 4.1 FE U1 (WinUAE on MB Pro 2016) / A1200 w. Blizz.1230IV / CV64

@miggymac

you have to sey thankyou only to Zoltan who gave us this opportunity.
about the windows error i think something is missing there . try to install gtk3 library fo windows or sdl library for windows. by the way this is a rc0.


about networking it is making mad me too. im waithing if zoltan can help about.

Last edited by tlosm on 13-Jul-2018 at 06:55 PM.

_________________
I love Amiga and new hope by AmigaNG
A 500 + ; CDTV; CD32;
PowerMac G5 Quad 8GB,SSD,SSHD,7800gtx,Radeon R5 230 2GB;
MacBook Pro Retina I7 2.3ghz;
#nomorea-eoninmyhome

@tlosm
i have a ? i have an os 4.1 uae image file. can qemu use that or is it all over with this ?
i know its a stupid ? but is there any way to convert the uae file. becuse of course it will nok work but is there any way to make life easy on this matter

@retro

No. SAM460 requires drivers available only with the SAM460 version of OS4.


Note WinUAE OS4 experience is now superior to plain QEMU/SAM460 emulation (faster and more compatible GFX, more stable etc.), better to stay with what you have than waste your time with still rather experimental QEMU emulation.