I will purchase a copy in the next few month.

_________________
Amiga600/Vampire2/PrismaMegaMix

@fingus
Quote:

Please add 32Bit-Screen for PPaint.

Even though the selections in the PPaint screen requester say CLUT8, they (at least the higher resolutions) are actually 32 bit. I think those PPaint high resolution CLUT8 modes are actually 8 bit screenmodes emulated on a 32 bit screen.

If my WorkBench is set to 32 bit 1280x1024 then the monitor doesn't resync when I switch to the 1280x1024 PPaint screen. If your PPaint resolution is different from the WorkBench resolution then there will be a resync. For example, if you have a 1024x768 32 bit WorkBench and 1280x1024 PPaint screen then you will get a resync when switching to the PPaint screen.

I wish Andy would add a screen title to the screen though. It currently listed as untitled.

_________________
X1000 with 2GB memory & OS4.1FE

Nice work folks.

Don't have the time to dabble in gfx just now but should that change I'll know where to go.

_________________
Robert
--
A1XE G4, OS4.1. Peg1 G3, MOS 1.4.
Abel Soul - Check out our tunes on Spotify

@eliyahu:

With the same Resolution like on Workbench for sure, its both FullHD (1920x1080)

That´s why i´m wondering about it, too


Maybe one reason is how the RadeonHD-Driver is handling that 8Bit-CLUT on a 32Bit-Screen?

Last edited by fingus on 09-Jan-2015 at 03:57 PM.
Last edited by fingus on 09-Jan-2015 at 03:56 PM.

_________________
I´m back in 2023 on Classic Amiga with my A1200/Blizzard1230IB@50Mhz, 32MB RAM, AmigaOS3.2 and ROMs, Indivision AGA MK3, Author of Amiga-Flipclock (OS4)

Quote:

any update to when Radiance Multimedia Suite will be released

This has been asked a few times already. No answer as of yet.

It is of course stopping some people from making AmiStore purchases (myself included) as why buy something that might be cheaper in a package deal?

_________________
Sam

@fingus

Screen switching works fine here on my Sam460 with same resolution (32-bit 1920x1080), no delay.

How much video memory does your Radeon HD card have?

@fingus

Quote:

@broadblues: Please add 32Bit-Screen for PPaint. Why? When switching between my 32Bit screens and PPaint comes next, my TFT-Monitor (or RadonHD-Card?) needs 2-3 Seconds to switch to that 8Bit-Screen. That is most disurbing. Btw i bought previous Version for OS4. Great work and enhancements so far!

Assuming you are using the AmigaOS4 version under AmigaOS 4 then this is already implemented.

You can choose to "promote" the image mode to a deep screen mode, by default this is set to 24 (colour depth screen bits depth) which implies an ARGB32 screen.

Make sure the line

PROMOTE = 24

is present in the program setting part of PPaint:PPaint_Prefs/Startup_1.set

And make sure that PPaint: is not pointing to any previous version of PPaint.


Check that the

_________________
BroadBlues On Blues BroadBlues On Amiga Walker Broad

@Fingus
Quote:

Maybe one reason is how the RadeonHD-Driver is handling that 8Bit-CLUT on a 32Bit-Screen?

There is no such thing as 8bit CLUT on a 32bit screen

The screen is 32bit the Image bitmap (offscreen) is up to 8 bit planar in main memory.

The only way I can see this going qwrong if you have more than one 1980x1080p 32 bit mode (ie one at 60Hz and one at 70Hz) Bestmode ID will choose the first one on the list that matches, which might not be the same as your workbench.

_________________
BroadBlues On Blues BroadBlues On Amiga Walker Broad

Its working now!

I have installed the new Version from the scratch.

It seems that something with the older Version was not correct installed or something else.

_________________
I´m back in 2023 on Classic Amiga with my A1200/Blizzard1230IB@50Mhz, 32MB RAM, AmigaOS3.2 and ROMs, Indivision AGA MK3, Author of Amiga-Flipclock (OS4)

Did anyone a try how the 68k version runs on MorphOS?

_________________
I miss draggable screens in MorphOS... and do you? I know I'm in a minority unfortunately.

@broadblues

I still get everytime I start PPaint the ASL screenmode requester ¿:-/

1)Deleted (backed-up) Startup_1.set and Satartup_2.set
2)Started PPaint and asks/shows ASL screenmode requester, select 800x600
3)In PPaint choose SAVE SETTINGS and it creates Startup_1.set and Satartup_2.set files
4)Quit PPaint
5)Restart PPaint and again ASL screenmode requester.

Any idea what I'm dong wrong?

@amigakit

What if you dont have AmiStore application?

_________________
Amiga Developer
Amiga 500, Efika, Mac Mini and PowerBook

Quote:

Please add 32Bit-Screen for PPaint. Why? When switching between my 32Bit screens and PPaint comes next, my TFT-Monitor (or RadonHD-Card?) needs 2-3 Seconds to switch to that 8Bit-Screen. That is most disurbing.

+1 !!!
Yes, this is very annoying. Even when choosing the same resolution, the change in bit depth causes a monitor resync, and modern monitors are *very* slow at resyncing. 2-3 secs.

And now another wierd problem with 7.3: Cannot load UIGraphics.pic, but it's right there:
Paint:Programs/PPaint/PPaint_Prefs/UIGraphics.pic
That's strange since I know it worked after I first installed it a couple of weeks ago.

Maybe I should just get 7.3a and make a fresh install...

Last edited by Deniil715 on 10-Jan-2015 at 10:36 AM.

_________________
- Don't get fooled by my avatar, I'm not like that (anymore, mostly... maybe only sometimes)
> Amiga Classic and OS4 developer for OnyxSoft.

@itix

Classic users without the AMIStore app store can instead buy it directly through the official website here: www.ppaint.com and download it from our secure website (see news item)

Alternatively because it is over 9MB they can buy it preinstalled on an Amiga formatted CF card here:

http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=883

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

@amigakit

Yes I know that but if user already bought 7.3 and wants to update to 7.3a?

_________________
Amiga Developer
Amiga 500, Efika, Mac Mini and PowerBook

Everyone who purchases has an AMISphere username and password. These login details can be used to access the A-EON Secure Download website and also to access AMIStore.

Upgrade process for users without access to AMIStore is simply to login to the secure download website and redownload the new version.

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

Being as positive like the earlier user. What happens when You click Print in OS4?

@PR

Quote:

Being as positive like the earlier user. What happens when You click Print in OS4?

It Prints.

_________________
BroadBlues On Blues BroadBlues On Amiga Walker Broad

Wow. Just install and thats it? Now we only need a working Net!

Last edited by PR on 10-Jan-2015 at 03:02 PM.

@PR

Quote:

Wow. Just install and thats it?

Assuming you installed a printer driver for your printer yes.

Quote:

Now we only need a working Net!

Huh? What has the network to do with PPaint?

_________________
BroadBlues On Blues BroadBlues On Amiga Walker Broad