@kas1e

I want you have configured and operational my YAS 2.9 and Simplemail Installations.

It's more important than the games.

Can somebody carry the task of configuring these two e-mail clients just for me.

I can send via PM.

And about Amiga type Playstation ones gamepads.Where can I get one?

What are compatibles with my X.5000?

I want to play games such MAME 0.151,FPSE and ROTT for example.

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@Spectre660

I tried but I don't feel like anymore.
time for me to throw in the powerpc towel.
Over and out.

Quote:

Spectre660 wrote: @newlight run this : version sys:Libs/Warp3D/HWdrivers/W3D_SI.library full and see if you get this : W3D_SI.library 1.14 (04/14/2015) Quote: newlight wrote: @pavlor Yes I have all the drivers of Warp3D Nova installed from my favorite dealer Amedia from France. About the WHDLoad game complete pack the archive is intact since I downloaded from the Internet months ago.And is to play the games with RunInUAE. I hope someone here can catch attention for my problems anyway Amiga Rulessssss!!!!

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@newlight

Quote:

I want you have configured and operational my YAS 2.9 and Simplemail Installations. It's more important than the games. Can somebody carry the task of configuring these two e-mail clients just for me.

Using YAM 2.10dev will probably fix your problems. I don't think all the SSL issues were handled with 2.9.

Download the latestly monthly from http://yam.ch/
Once installed you will have to download a new executable about every month, but it works wonderfully on my X5000.

t

@newlight

In GUI Prefs, Effects page, is compositing able and enabled?

So you installed AmiSSL 4.1?

How were you downloading games? You were emailed a game as attachment? But it won't download ther email?

Internet works otherwise?

Hard to diagnose without knowing ISP, settings and on screen errors. Perhaps best to open a new thread. Lots of different issues here, some don't look X5K related, but software related.

Last edited by Hypex on 02-May-2017 at 03:49 PM.

@Hypex

Activated

_________________
AMIGA 500 1.5 MB ACA500/ACA1232 accelerators
AMIGA 500 German
CD32 unexpanded
Amiga 1200 Tower on AmigaKit since years
AMIGA 1300 030/50 Mhz/32 MB WB 3.9 with lots of games&demos
AMIGA ONE XE G3 PPC 800 Mhz/1 GB RAM/RADEON 9250 128 MB/SATA CONTROLLER

@Spectre660

Quote:

time for me to throw in the powerpc towel. Over and out.

Wow!
Not cool at all.
Tabor's not released yet, or the P5040 based X5000, and a PPC/Linux advocate leaves the house.

I'm still buying one last PPC system, but the writing is on the wall folks.
No Freescale no AMCC, no PPCs...as was said....over and out.

@iggy

We're on the fast train to the last train to transcentral...

Something like that.

@Hypex

Quote:

We're on the fast train to the last train to transcentral...

"The liberation loophole will make it clear
On last train to trancentral (last train)"

I'm not sure I get it...

And I'd feel more comfortable if we were on the train to X64.

@thread,

What are the chances Hyperion Entertainment will complete AmigaOS4.2 (as originally described and promised free to X1000 owners), before the last 5020/5040 PPC CPUs stop being produced?

I'd say it's probably 50/50 chance, but only if they don't quit working on it, since the 5020 & 5040 PPC CPU's are supposed to be available for a few more years guaranteed. There is also probably a 50/50 chance that Hyperion Entertainment stops development of AmigaOS4 completely, and leaves the Amiga community, so that someone else will be required to step up, to get 4.2 completed.

Edit: Does Hyperion still have any programmers working on AmigaOS4.2? Do they get paid, or only work on it 5 hours a month, when they feel like it?

Last edited by BoingBear on 03-May-2017 at 01:17 AM.

@iggy

That's the one!

Quote:

I'm not sure I get it...

Oh I was kind of going about it backwards. I read this and it came to mind:

Quote:

over and out

@BoingBear

Quote:

What are the chances Hyperion Entertainment will complete AmigaOS4.2 (as originally described and promised free to X1000 owners), before the last 5020/5040 PPC CPUs stop being produced? I'd say it's probably 50/50 chance, but only if they don't quit working on it, since the 5020 & 5040 PPC CPU's are supposed to be available for a few more years guaranteed

SMP or AMP will work regardless if the OS is running on PA6T or P5020/5040 CPUs. If it's implemented properly.
That said, I do not believe we'll ever see 4.2 as was described 7-8 years ago. Maybe if A-eon takes over, but it would take years, probably well into 2020s.

_________________

@kas1e

My X5000 motherboard arrived yesterday! I will put it together this weekend.

Are there any pitfalls to avoid or anything to be aware of during assembly?

_________________
---------------
AmigaOne X5000 P5020 2Ghz, OS 4.1
AmigaOne XE G4 800mhz, OS 4.1
A1200T 40Mhz 68040, OS 3.9

@daveyw
Quote:

My X5000 motherboard arrived yesterday! I will put it together this weekend. Are there any pitfalls to avoid or anything to be aware of during assembly?

No, there wasn't any pitfalls. I even first time boot without dvd / hdd, just to check if something visibly on screen, and as all was ok, then i attach dvdrw and hdd. Through, should to note, that in case with my dvd there is bug in the UBOOT: it didn't shows in uboot at all , but, it still detected and works fine.

As from software side, if you wasn't os4 user before, probably only advice to not think that its all will be as on windows, like "click/click/all works", os4 hobby os, so need a bit of dig in into details to make all allright.

I mean, take a look at newlight's problems: they chaotic and unstructured. He can't configure networks, mail clietns, games, basic operations. Probably he expect that everything will be easy-peasy without needs to dig in, but its still need some knowledge and patience to configure all allright. He even can't answer properly to Spectre's question exactly about what version and of what installed, so no chances to help him.

Last edited by kas1e on 04-May-2017 at 08:14 AM.

_________________
Join us to improve dopus5!
zerohero's mirror of os4/os3 crosscompiler suites

@kas1e

what would you say, if you spend thousands of dollars on a product wouldn´t you expect to work out of the box, at least regarding the components that are already integrated?

@WolfToTheMoon

SMP will break lots of 68k software, we saw that on AROS now when testing Aros 68k with the changes. At highest you can only implement a very primitive concept that has nothing to do with SMP and needs adapted software, that will be weak point of Tabor too, no multicore support and even if it would need adapted software so no benefit there

@OlafS25

Quote:

SMP will break lots of 68k software, we saw that on AROS now when testing Aros 68k with the changes. At highest you can only implement a very primitive concept that has nothing to do with SMP and needs adapted software, that will be weak point of Tabor too, no multicore support and even if it would need adapted software so no benefit there

sorry, but this isnt any definite for what i am aware of. none is seriously trying to implement multicore on aros68k. there isnt any hardware it could even be tested with. there was simply a common, platform independent, semaphore structure that apparently required some padding, at least for x64 smp, which change slipped through, since most 68k software worked with this. this has been reverted and all is fine in this respect. other than that all or most smp changes are either in appropriate arch branch or guarded by smp ifdefs.

Last edited by wawa on 04-May-2017 at 09:52 AM.
Last edited by wawa on 04-May-2017 at 09:51 AM.

@wawa

ok

then we do not really know how much would break

@kas1e

Good to hear. Yes, I have an A1XE and use 4.1FE already. I like to customise my Workbench quite a lot, so I am expecting to spend quite a bit of time installing & configuring to get it the way I like.

I used to have a DVD drive for my A1 that was very flaky, it would only boot 1 in every 5 attempts. Bought it brand new. Replaced with with a cheap 2nd hand drive, it that one worked brilliantly.

_________________
---------------
AmigaOne X5000 P5020 2Ghz, OS 4.1
AmigaOne XE G4 800mhz, OS 4.1
A1200T 40Mhz 68040, OS 3.9

@olaf
Quote:

what would you say, if you spend thousands of dollars on a product wouldn´t you expect to work out of the box, at least regarding the components that are already integrated?

No one will setup for you your accounts in mail clients. No one will install for you commercical 3d party games. No one will fix your problems with amidock, when you chaotic press on buttons and remove all by one and do not know what you add, for what, and from where.

And, let's be adequate there : you know what is amiga, you know what is amigaos, morphos, aros, whatever. And before spending thousand dollars, you should know how to use such things, for what you need it, and what you want from it. If you can't FOR SAKE OF MIGHTY CHRIST setup mail clients, and even think that writing phrases like "my YAM don't download games" (wht ? my phone don't dance for me?) , then, my bet that even on windows there will be problems.

So, plz, do not show it like someone buy something, and it didn't provide what expected. It give exactly what we all know : just better and faster hardware, with hobby-antique os, which is do what you want to do, but if you don't you can fuckup it very-very easyly.

Probably you misread my "need to dig in". By that i mean, you should know that there is filesystem, internet, archives which unpacks by unarchives, deficons which you can fuckup if you will erase something from system. Not like you should know nothing, press "ok" and everything automatically will works. Even on windows it didn't works like this.

Hope that clear.

Last edited by kas1e on 04-May-2017 at 10:31 AM.

_________________
Join us to improve dopus5!
zerohero's mirror of os4/os3 crosscompiler suites

@davew
Then for you it will be pleasure and exactly what you expect :) I am sure you don't expect like some others that there is some magic SMP should be "soon" and co :)

_________________
Join us to improve dopus5!
zerohero's mirror of os4/os3 crosscompiler suites