So, the next A1 will ship with SATA on the motherboard? PLEASE !

_________________
- KimmoK
// For freedom, for honor, for AMIGA
//
// Thing that I should find more time for: CC64 - 64bit Community Computer?

Fantastic news and i hereby volunteer to test it to death

(my SATA card + hdd is on its way as we speak)

_________________
See my blog and collection website! . https://www.blog.amigaguru.com

@all

Our thanks should go to Max & Libero for the creation of this driver: it brings AOS4.0 that much more up to date with other OS-offerings. On one hand it makes my decision about buying an A1 that much easier again (but then again, could it ever exceed the 100% mark anyway?). On the other it may retard that act just even by so much as I may wait for an A1-mobo with the Sil3112A chip to turn up. Mind, the bank notes are turning redhot in my rear pocket.

But as to the plea for SCSI-support in AOS4.0: I fully endorse it! As I too do have a vast set of SCSI-devices laying idle, but some are brand new. Some HD's (2.odd GB), some ZIP's (100Mb), a Plextor 40x CD-ROM, a Plextor CD-RW with some impressive figures on the bezel, etc., etc.

Just my 2 cents...

Regards,

OldFart

_________________
Life is a waste of time.
Time is a waste of life.
Get wasted all the time
and you'll have the time of your life!

Quote:

Our thanks should go to Max & Libero for the creation of this driver:

I think (but I could be wrong) that you should include Stephane in the list. He is the one that actually wrote the driver. The other two supplied the PCI card and drive.

@Yabba

My fault. In my enthousiasm I forgot. Thanks for remark.

So a big thank you to Stephane!

Regards

OldFart

_________________
Life is a waste of time.
Time is a waste of life.
Get wasted all the time
and you'll have the time of your life!

This is why motherboards should have 10-15 pci connectors and no onboard stuff.
There is always new things comming out that requiers a pci slot.

And in the amiga market you don't buy a new amiga every second year.
Atleast i don' think so.

Great work.

Thanks to Stephane, Max, Libero and to all those nice men that make anything useful happen for amiga...

_________________
-------------------------------
AmigaOS, the last hope...

Cheaper than the Sil0680? I think not. 30% more expensive here in Norway.

Still, very nice to see more drivers

_________________
This weeks pet peeve:
Using "voltage" instead of "potential", which leads to inventing new words like "amperage" instead of "current" (I, measured in A) or possible "charge" (amperehours, Ah or Coulomb, C). Sometimes I don't even know what people mean.

great news ,
i don't have an A1 but on my pc 2600+ i use the onboard serial ata (sil 3112)
with 2x 120GB SATA and it works great .

+ sata drives are the faster available
+ dvd writers are available on sata ( no advantage but it's good to know )
+ the sata connector is tiny
+ for once we have a solution for the future

- don't expect a big performance increase (under windows it's not
worth the pain , but maybe with OS4 )
- only a few drives support Tagged command queueing not all it seems
- the first sata drives comes with a bridge satapata on the pcb , and external bridge are not perfect ...sometimes it works, sometimes not (useful for PATA optic drives )



I've heard of future SCSI drives with SATA connectors and compatibility with sata ?
someone know more about that ?

i'm thinking more and more about a µA1
more drivers and it will be a good solution ....

Quote:

Actually there are many that believe that SATA will kill SCSI once and for all!

But isn't SCSI developped any further?

OTOH I thought SCSI HD were much more reliable than IDE HDs that's why server mainly use SCSI HDs.
(But I think that isn't so important for homeusers like us)

_________________
A computerworld without MS products and Windows!
Connect your Amigas ...
...The Red ONE-A1XE G4 - A3000T- A3000 - A4000 - A2500- A1000 - A600 - CDTV - CD32...
and your PDAs and laptops ...
Psion 5mx Pro - Psion NetBook - Apple iPhone - MacBook Pro

@codesmith

Is it possible to connect several SATA HD in serial connections like SCSI or the former C=64 devices?

_________________
A computerworld without MS products and Windows!
Connect your Amigas ...
...The Red ONE-A1XE G4 - A3000T- A3000 - A4000 - A2500- A1000 - A600 - CDTV - CD32...
and your PDAs and laptops ...
Psion 5mx Pro - Psion NetBook - Apple iPhone - MacBook Pro

Quote:

moreover, I don't see tht point in having SATA 300 or 600... it's already 150MB/sec per peripheral...so anyone knows a peripheral which achieves more than 150MB/sec ???

So what's the use of these speeds?
150MB/sec is a theoretical value which won't be achieved under normal usage.
And the PCI bus on A1 doesn't have this speed either. The max transfertrate for PCI bus is 100MB/sec or am I wrong here?

_________________
A computerworld without MS products and Windows!
Connect your Amigas ...
...The Red ONE-A1XE G4 - A3000T- A3000 - A4000 - A2500- A1000 - A600 - CDTV - CD32...
and your PDAs and laptops ...
Psion 5mx Pro - Psion NetBook - Apple iPhone - MacBook Pro

This is just truly awesome! Getting better and better! This is something i would definitely like to consider. A very fast S-ATA harddrive-system based on the Sii3112 There should also be something called S-ATA RAID, which is the latest...It's all catching up very nicely

Let's hope the MicroATX A1XC AmigaOne will have S-ATA, too

This is just great!

Keep up the good work!

"So what's the use of these speeds?"
"And the PCI bus on A1 doesn't have this speed either. The max transfertrate for PCI bus is 100MB/sec or am I wrong here?"

Can SATA devices transfer data directly between each other?

It could provide one way to fill the extra SATA bandwidth when multitasking, even when PCI teorethically only manages to handle 133M/sec....

Do those SATA cards work on 66Mhz PCI?

You know, untill AGP2x is really needed, one could use SATA cards on the 266M/sec PCI slot #4... Using the second MAIN ADVANTAGE OVER PEG2 !!! Sorry about the P* word ! Do not freak out guys !

Last edited by KimmoK on 29-Oct-2004 at 01:32 PM.

_________________
- KimmoK
// For freedom, for honor, for AMIGA
//
// Thing that I should find more time for: CC64 - 64bit Community Computer?

@mbilla

Quote:

Is it possible to connect several SATA HD in serial connections like SCSI or the former C=64 devices?

No. With SiI3112A you can use two SATA devices only.

@mbilla

Quote:

The max transfertrate for PCI bus is 100MB/sec or am I wrong here?

The max transfer rates for the PCI bus are:
132MB/s for 32-bit 33MHz PCI,
264MB/s for 32-bit 66MHz PCI,
264MB/s for 64-bit 33MHz PCI,
528MB/s for 64-bit 66MHz PCI.

Thanks to Stephane, Max (m3x) and Libero (Amiga-One).
You rock guys

@tjaoz
Hi, happy to see you posting again here on Aw.net

_________________
ikir

Hmm, maybe I am missing something but how would having SATA support in UBoot make the u-A1 more or less "envious" from other SFF computers?

Many of the new SFF PC motherboards are coming with a SATA controller onboard, and the u-A1 does not....if it did however, I could agree with your point. Otherwise, the last thing I want to have to put in my "1" PCI slot is a disk controller, but maybe that's just me!

- DJ

tjaoz:wb!

_________________
See my blog and collection website! . https://www.blog.amigaguru.com

I am really very happy that this news is been several agreeable, I hope soon of to post a news with features and photograph of the cards SATA used and how many more news on costs and availability. Tomorrow I should succeed to put on my site the references of the cards SATA and UATA with chipset silicon image in economical versions and deluxe (premium accessoriate) and relevant prices.

To this am secure that they will follow other projects. It is for a long time that I and Massimiliano Tretene we are cooperating to support much more amiga and its users, making available time and it structures.
Still thanks for the support that given us.

Libero Moschella ^_^

P.s. Sorry for the mine awful English

_________________
_________________
Libero Moschella aka "Amiga-One"
Alternative Holding Group Srl.