@mrodfr

Yes you can, all depends on drivers anyway.

_________________
ikir

The X1000 will come with an ATI Radeon R700 based videocard. This means Hyperion ARE making R700 drivers. So we can use an R700 based videocard (PCI-e) with the Sam460

_________________

Expected news but nice it's official now ! Great !

_________________
Rock lobster bit me. My Workbench has always preferences. X1000 + AmigaOS4.1 FE
"Anyone can build a fast CPU. The trick is to build a fast system." -Seymour Cray

Software is here on the way, New hardware is coming (Summer and September)... soon will be time for a user base increase... Marketing? Ads?

_________________
Catalonia, The next State in Europe

@carrera

Word of mouth / chat / amigapages / other newspages posting about amiga

Quote:

But, how can I install AmigaOS 4.1 on this board only with one SATA port?

An IDE/PATA optical drive.

_________________
--
2B v ~2B = ?

I dont think it has an IDE connector.

_________________

Nice!

Maybe one could add a SATA-controller card. It shouldn't be necessary but it's an option.

Congratulations guys! Very nice. Promosing spec on that board... you really should consider good Linux support though..

Me not surprised either, but great job indeed. Keep up with it!

So it seems, that there will be 2 options in a few months. One Hi-End next-gen Amiga (AmigaOne X1000) and one low-end (Sam460ex and variants).

Last edited by Phantom on 15-May-2010 at 06:03 PM.

_________________

Its good to have expectations,
but to my knowledge RadeonHD driver is not done yet,
no one speaks of it and no one sais that X1000 will come
with the gfx card (see the X1000 specs), neither with
integrated gfx (so how then sys is complete?)

Currently, Radeon 9200 is still OS 4.1 default gfx
and only new thing I see on the EP460 pics is
Sillicon Motion integrated gfx support

Its interesting to EXPECT RadeonHD drivers will be usable to all
(EP440 for PCI cards, 460 and X1000 for PCI-E) but we need to jump
first.

Altough time is near, only avail thing at this moment is EP440 with Radeon 9xxx

_________________
OS 3.x AROS and MOS supporter, fi di good, nothing fi di unprofessionalism. Learn it harder way!
SinclairQL and WII U lover :D
YT http://www.youtube.com/user/rasvoja

@vox

A-eon site says that X1000 will use R700 GFX card (probably ATI/AMD 4XXX series).

>I am just surprised to see that the reported cache line size is 128 bytes. In PP460 >related docs I looked at, the given cache line size is 32 bytes.

maybe its 2. level cache line size.

On the 460ex page stand performance is 2dmips/MHZ

I have search for values other CPU get and some links to compare speed.best read all comments on page below.the k10 and nehalem look very high, but that the very slow Intel Atom have 2,5 dmips/MHZ is intresting and i think a 1 GHZ Peg2 is lots faster.

with 900 MHZ aone its intresting to see real world benchmarks, because SAM have faster mem, can help the slow performance /MHZ 460 ex CPU

"""""
http://www.amdzone.com/phpbb3/viewtopic.php?f=52&t=136992

The Cortex A9 does 2 DMIPS/MHz aggregate. The Atom does 2.5. K10 does 16. Nehalem does 47. So there is a real, concrete gap between the best case scenario for the ARM chip and the absolute minimum performance for Intel/AMD. To be clear, Atom is within range of ARM (particulary given Intel's inability to produce an IGP chipset), but it is unlikely that Bobcat will repeat Intel's mistake.
http://www.ocworkbench.com/2008/ecs/ECS_945GCT-D_Atom_board/b1.htm
http://www.arm.com/products/CPUs/ARMCortex-A9_MPCore.html
http://pcwizkidstechtalk.com/index.php/amd-phenom-x4.html
http://www.theinquirer.net/inquirer/review/1528599/xeon-w5590-breaks-records-part
"""""

some results :

Quote:

uA1-750GX 2.32 DMIPS/MHz @800MHz = 1856 DMIPS 440EP 2.0 DMIPS/MHz @667MHz = 1334 DMIPS - dvd playback 80-85% CPU, 20% short 460ex 2.0 DMIPS/MHz @1.066Ghz = 2132 DMIPS

_________________
Download 499.26 Mbps, 659.94 Mbps Upload :)

Still remember when I was telling everybody that AOS on 460ex was a sure bet, and some were saying the opposite...

_________________
SamFlex Complete 800Mhz System + AmigaOS 4.1 Update 4
Amiga 2000 DKB 2MB ChipRam GVP G-Force040 Picasso 2 OS3.9 BB2
AmigaCD 32

@asymetrix

DMIPS results aren´t very helpful. 750GX has really big L2 cache (1 MB) and I think it will be as fast or faster than 1066 MHz 460EX. You can see www.eembc.com for comparison: 750GX 1 GHz is 2 times faster (in sense Y=2*X) than 440EP 666 MHz.

Here i find a table of Vax Mips value.

http://en.wikipedia.org/wiki/Instructions_per_second

seem simualar with dmips, because arm reach 2.
the legendary pa6t values are too here, its 4,4.

A AMD athlon 64 3800+ X2 (dualcore) reach 7,3

but the values need divide by core number(2 in case), so PA6 reach 2,2 on 1 core.thats much slower performance/MHZ as other CPU.

seem no wonder possible, a CPU that need less power have less performance /MHZ.

@bernd_afa

Quote:

seem simualar with dmips

Of course, Dhrystone, Specmark and SpecInt92 have VAX 11/780 as their reference machine...

Quote:

but the values need divide by core number(2 in case), so PA6 reach 2,2 on 1 core.thats much slower performance/MHZ as other CPU.

I would be very careful when interpreting these data. As you see, Cell BE PPE (PS3) has here much higher result than PA6T. However IBM claims that PPE 3.2 GHz scores only 423 SpecInt2000 (PA6T 2.0 GHz should reach 1000 SpecInt2000).

Last edited by pavlor on 16-May-2010 at 08:36 AM.

>I would be very careful when interpreting these data. As you see, Cell BE PPE (PS3) >has here much higher result than PA6T. However IBM claims that PPE 3.2 GHz >scores only 423 SpecInt2000 (PA6T 2.0 GHz should reach 1000 SpecInt2000).

but we never see a confirmed specint value of pa6.