@Drewlio77

That model works ok on my Sam460ex .

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

On my AmigaONE X5000 with Warp3D Southern Islands, XFX RadeonHD 7770 and debug kernel I get between 220 - 227 FPS on Cow3D.

Once I press 'b' it reports 236 FPS (5813tris 2914points)

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

someone else could test, but i think result within this range of fps may be achievable with winuae on a proper pc, considering surface is only a tablet with mobile 1.7ghz i5 and intel hd 4000, which means almost no 3d acceleration by todays standards, no? ;)

Have you tried it with the new Warp3D drivers?

Drewlio77

@Drewlio77

Yes. It works .

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

Spectre660

Thanks. I shall order one one right away.

Drewlio77

@amigakit
Hmm shouldn't it be more frames in cow3d?
A pi2 gets 550fps in software mode.

Are you sure that cow3d is running accelerated at all on your machine?
Just out of curiosity, could you try it with wazp3d?

_________________
AROS Broadway - AEROS - Aminux - AmiCloud - indieGO! Appstore - AmiWallet - VAN lossless video codec - AMC Amiga media Center -KrypUnite - LibertyNet - MinX - amigaNX

Quote:

A pi2 gets 550fps in software mode.

you mean aros native on pi2? cow3d includued with aros wazp3d contribution is an old much simpler version. it naturally gets higher framerates, i get 7200fps with aros hosted on my surface. this isnt really telling.

@All
The best tweak after all for ioquake3..

cg_simpleItems " - With this on, all items will be displayed in 2D rather than spinning in 3D. This is especially helpful for people with slower machines as it can really speed things up. Dont bother if you have a specification above or near to mine. FPS gain with this on: 3 - 10 FPS.

Hmmm in one aim_map i try with many 3dicons i gain +70fps ..
Vsync off......have 50 fps with all 3dicons rotating when switch on simpleitemes get 121 fps....vsync off offcourse..

_________________
AmigaOne X5000, AmigaOS 4.1 Final Edition Update 2 special super 2 cores prepared super edition v75 christmas speciale uniqe quadro prepared AmigaOS... TWO MORE YEARS IS NOTHING IF YOU BEEN WAITING SINCE 1994..

Good news, but looks like a bit longer to wait as only have a passively cooled 6450 in my A1-500.

Last edited by dan.hutch on 03-Apr-2015 at 11:26 AM.

@wawa
Aros hosted on pi 2.
Wasn't aware that there is a difference in cow3d demo for different platforms.
Need to check it on os4.

_________________
AROS Broadway - AEROS - Aminux - AmiCloud - indieGO! Appstore - AmiWallet - VAN lossless video codec - AMC Amiga media Center -KrypUnite - LibertyNet - MinX - amigaNX

My Sam460ex came with Radeon HD 4650 aka RV730.. is that going to be supported at some point in the near future?

Last edited by djrikki on 03-Apr-2015 at 02:36 PM.

_________________

Quote:

My Sam460ex came with Radeon HD 4650 aka RV730.. is that going to be supported at some point in the near future?

There are no plans to support R700 cards under Warp3D and I've no idea how long you could be waiting for Gallium.

A-EON didn't feel it was didn't feel drivers for older cards were financially viable since they were already difficult to source when they first decided to develop 3D drivers.

@ Amigakit

A silly question: if a user owns 2 Amiga Ng (i.e. X1000 and Sam460ex) with installed two different graphic cards, belonging one to 6xxx serie and one to 7xxx serie, does he have to pay twice for Warp3D drivers?

Hi. Yes it's one licence per machine for both the RadeonHD driver and Warp3D driver. See terms and conditions on A-EON download section.

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

Quote:

Aros hosted on pi 2. Wasn't aware that there is a difference in cow3d demo for different platforms. Need to check it on os4.

here is the version i have tested with:

http://aminet.net/dev/src/Cow3D.lha

@ djrikki

I asked the same thing and Amigakit said they have started on supporting 6 series cards but no timeline so I'm looking for a suitable 7 series card to replace my HD6850 as I'm the impatient type

_________________
____________________________
c64-2sids, A1000, A1200T-060@50(finally working!),A4000-CSMKIII
! My Master Miggies- Amiga 1000 & AmigaOne X1000 !
mancave-ramblings
X1000 I BELIEVE

The alpha version of the Evergreen driver is on my hard disk but there is still some issues for the developer to solve before we go to beta test. It is getting there..

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

@Amigakit

the updated Warp3Dsi archive on Amistore contains previous 1.8 version of the drivers and an old minigl versions.... (the debug version is not present anymore)

Last edited by SOFISTISOFTWARE on 03-Apr-2015 at 08:10 PM.

_________________
Sam 460EX, 2Gb Ram, Radeon R7 250, AmigaOS4.1 FE
A4000 PPC604@233, Mediator
A1200 PPC603@160, Mediator
uA1 G3@800, 512 Mb [sold]

Yeah, something went wrong with the "update"