• Huge A500 cycle exact mode compatibility improvement.
  
• Improved unexpanded A1200/CD32 emulation compatibility.
  Approximate cycle-exact 68EC020/68020 emulation implemented, includes emulated 68020 instruction cache, approximate prefetch emulation.
  
• 68040 MMU emulation (from Aranym) For example Enforcer and M68K Linux compatibility. Not compatible with JIT.
  
• A2065 Zorro II hardware ethernet card emulation.

• CD32 drive emulation compatibility improved, includes animation CD streaming.
  
• Old game protection dongles emulated (Leaderboard, Robocop3, etc..)
  
• Built-in Vista/Windows 7 WASAPI sound API support.
  
• Real harddrive safetycheck only complains if drive is mounted read-write and has mounted Windows partitions.
  
• Full NTSC timing implemented (long/short line toggle etc..)
  
• "AutoVSync" mode that change native refresh rates automatically.
  
• Basic CPU frequency/bus multiplier configuration option added.
  
• Gayle IDE emulation compatibility improved.
  
• Single sided PC/Atari ST disk images supported.
  
• AVI and wave sound recording improved.
  
• File paths support http, https and ftp protocols.
  
• Automatic split DMS support.
  
• File dialog file type setting is stored to registry/ini.
  
• Display width is not anymore restricted to values divisible by eight.
  
• Bsdsocket emulation MSG_WAITALL implemented, CVS compatibility fix.
  
• Uaescsi.device TD_REMOVE implemented.
  
• DMA cycle debugger implemented.
  
• RTG screen mode on-screen leds.
  
• "Add PC drives at startup" does not mount drives that are also configured as real harddrives.

• Programmed refresh (non-PAL or NTSC) rate modes had bad sound.
  
• Right border background color error in some programs.
  
• On the fly USB input device insert changed unrelated keyboard layout settings.
  
• Non-DMA mode sprites work again (broke long time ago)
  
• 5.1 sound mode had wrong center and sub mixing ratio.
  
• CD32 pad default mapping green and yellow, RDW and FFW reversed.
  
• Uaescsi.device TD_GETGEOMETRY off by one error and no media status fixed.
  
• Directory filesystem ACTION_FH_FROM_LOCK notification bug fixed.
  
• Some types of serial ports were not detected.
  
• Randomly appearing single jumping black scanline finally fixed.
  
• Command line quote parsing was not compatible.
  
• Mouse didn't capture properly in mouse driver (tablet) mode.
  
• Directory harddrive duplication was possible in configuration file if path included national characters.

WoW thats a big list, very good!

Thanks.

_________________
Quote:

Easy Pocket Money, Freelancers & Experts Online

MiniMig FPGA, Sam440 Flex 733Mhz PPC, Amiga OS 4.1 Update 2, MorphOS 2.4, Other - AmiKit + Cloanto Amiga Forever 2008 + E-UAE, AmigaSYS

I will be testing this version during this week.

Thanks for the update.

Last edited by Zontrox on 14-Dec-2009 at 03:46 AM.

_________________
"Would you be willing to trade all the days from this day to that for one chance, just one chance to come back here and tell our enemies that they may take our lives, but they'll never take our freedom?!?" William Wallace (Mel Gibson in Braveheart

Congratulations for this new update although I don't might because I have Win98 in my old PC.

This is surely a major update!
Downloaded it right now and going to install ASAP on my PC!

Thank you a lot and keep up the effort!

_________________
God created Paula so that Allister Brimble and Dave Whittaker could do music

Check my Amiga gameplays (ITA)!

Cool for x86/x64 users ;)

Thanks!

What about AmigaFuture support? Are they 2.0 ready?

What about AmiKit or AmigaSYS?

I ask because I got Windows7, and both AmiKit and AmigaSYS have some nasty QA bug showing a cursor as a blinking pink square. Not sure whether this was about UAE, either AIAB or ClassicWB (that one using different UI than the said two) doesn't show that bug.

Maybe this will help remove the bug somehow... I suppose same issue is on Vista.

_________________
Amiga 1200 + WARP 1260 + AmigaOS 3.2

Nice update, this looks like the biggest WinUAE update in years

I mainly use my Minimig to play Amiga games on these days but I still use WinUAE on my laptop rather a lot so any update is welcome and this looks like it adds a ton of new features

@DiskDoctor

Sounds like a driver bug to me as I have been using AmigaForever 2008 under Windows 7 Pro 64-bit version on my laptop without problems since the official release.

Last edited by Dwyloc on 14-Dec-2009 at 03:15 PM.

_________________
Sam440ep 667mhz, 512MB, 120GB 2.5" HD, OS4.1FE
WinUae 3.0.0, OS 3.9, BB3, Catweasel MkIV
Amiga 1200, Blizzard 040/40 (BlizzardPPC 060/200 with SCSI removed at present), mediatorSX pci, Voodoo3, PCI network card os 3.9BB2
4MB Minimig with ARM addon boar

Minimig is great, it just needs AGA/CD32 update where it would come near to WinUAE capacities ... as well as 4MB (2MB FAST), FCPGA as standard ... and AROS 68k or Amiga OS 3.9 as standard OS ...

AmiKit and AmiSYS to my knowledge still use WinUAE 1.x, but I assume this update is essential for them too ...

_________________
Future Acube and MOS supporter, fi di good, nothing fi di unprofessionals. Learn it harder way!

thank you Toni Wilen......just downloaded.....

_________________
http://aros-exec.org/

http://serk118.blogspot.com/

Quote:

Minimig is great, it just needs AGA/CD32 update where it would come near to WinUAE capacities ... as well as 4MB (2MB FAST), FCPGA as standard ... and AROS 68k or Amiga OS 3.9 as standard OS ...

Quite true if you want a high end Amiga A1200 Tower or A4000 replacement then WinUAE is far better than a minimig...

But if you want an A500 replacement to play all your old A500 games with silky smooth scrolling and real digital Amiga joysticks then the minimig is a very good solution as it uses adf images rather than real floppy disks (which may not be working any longer) and can ether be used with a modern TFT monitor (as it has a built in scanndoubler) or a TV with a scart connector.

Even then I download each new WinUAE release and think WinUAE is one of the best things to ever happen for the average Amiga users, both past and present

_________________
Sam440ep 667mhz, 512MB, 120GB 2.5" HD, OS4.1FE
WinUae 3.0.0, OS 3.9, BB3, Catweasel MkIV
Amiga 1200, Blizzard 040/40 (BlizzardPPC 060/200 with SCSI removed at present), mediatorSX pci, Voodoo3, PCI network card os 3.9BB2
4MB Minimig with ARM addon boar

@Dwyloc

Quote:

@DiskDoctor Sounds like a driver bug to me as I have been using AmigaForever 2008 under Windows 7 Pro 64-bit version on my laptop without problems since the official release.

The bug persists in AmigaSYS and AmiKit under Windows 7, no bug in AF2008 (got one too). It's a matter of particular UI - Scalos in AIAB or ClassicWB causes nothing wrong, whilst "the other one" (DOpus? Workbench?) does.

What driver btw??

_________________
Amiga 1200 + WARP 1260 + AmigaOS 3.2

@DiskDoctor

I use WinUAE on Win7 Ultimate x64 version, and 2.0.0 runs fine on both AmiKit and normally with no cursor issues at all.

This would definitely point to an issue with a driver supplied with your laptop interfering with WinUAE. It could be something simple such as the way WinUAE now deals with the display. Have a look at the DirectDraw display buffer settings in the "Miscellaneous" tab. The default is DefaultRam, but on of the other 3 options may work for you, and if that is the case, it normally points to a conflict with your display drivers.

_________________
Test sig (new)

It still doesn't work with Win98 I see, hopefully this will be fixed in the next release.

@Minuous

Quote:

It still doesn't work with Win98 I see, hopefully this will be fixed in the next release.

I don't think WinUAE supports Win98/98SE for a while now. You better try an older version.

Last edited by Zontrox on 15-Dec-2009 at 03:30 AM.
Last edited by Zontrox on 15-Dec-2009 at 03:30 AM.

_________________
"Would you be willing to trade all the days from this day to that for one chance, just one chance to come back here and tell our enemies that they may take our lives, but they'll never take our freedom?!?" William Wallace (Mel Gibson in Braveheart

I seem to remember a pink rectangle around the mouse pointer as being related to an Intel graphics driver bug. You may want to try updating/downgrading the driver and/or changing the setting of Amiga Forever/Tools/Options/Plugins/WinUAE/[] Use non-local video memory.

@_Steve_

Thanks, man! I've changed DefaultRAM to SystemRAM and it works again!!

I've got a SoC graphics shared with RAM btw.

_________________
Amiga 1200 + WARP 1260 + AmigaOS 3.2

@Minuous

Quote:

It still doesn't work with Win98 I see, hopefully this will be fixed in the next release.

Support for the 9x kernal was dropped several versions ago when the development system was moved over to a newer version of the VisualStudio C/C++ development kit.

If you are using this on 95/98/ME, then you will have to use an older executable as no new ones will add support for this kernal again.

@DiskDoctor

Glad to have helped.

_________________
Test sig (new)