@Spectre660

As far as I remember, it's included in the CD but not enabled in Kickstart, since it's a beta version..

_________________
AmigaOS4 Beta-Tester
----------------------------------
Amiga X5000 8GB Radeon RX 560
Amiga A1222 2GB Radeon RX 550
Sam 460 2GB RadeonRX 550

@Hans

Not entirely related to this topic, but will the new Radeon drivers be made available to 440 users at some point?

@SinanG

>>It's a Digitus DS-33101 which uses Sil3512. I am also using that PCI card.
http://www.digitus.info/produkte/zubehoer/interface-karten/pc-interface-karten/sata-ide/sata-150-raid-pci-karte-2-port-ds-33101/
Digitus also makes PCI-E cards, I guess we (sam460 owners) should open a bounty for this PCI-E SATA-II cards
What do you think ?


That is great! Thank you for letting me know.
Does this card work? If so I am going to buy one, everyone with a SAM460ex should

Is it possible to have a 4 port model instead of just 2?

Last edited by TheDaddy on 28-Feb-2011 at 06:55 PM.

_________________
www.loriano.pwp.blueyonder.co.uk

@Spectre660

The SATA connector I referred to in point 2 in the long post above, is a connector emanating from the PSU. If it supplies no power that is an argument for returning the PSU in favour of a better one with quiet operation.

On other matters it looks like I can get a low profile ATI Radeon HD 4650. Someone is working on a PCI-e sata controller for those with higher aspirations but when is unknown.

Noel

@Daniel

Quote:

Daniel wrote: @Hans Not entirely related to this topic, but will the new Radeon drivers be made available to 440 users at some point?

Yes, it will eventually be available to users of all AOS 4 hardware.

Hans

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.

The HD4670 card that arrived today didn't fit.
Well. If I removed the fan and shortened som legs of some of the components on the sata 3114 controller it would. But I wait until there is some drivers for a pci-e1x sata controller.
I'm happy with my 4350 now since Hans has fixed the issue.

Don't wish to experiment with this 460 until I have a backup one.

Btw. The sata 3114 has 4 sata ports. Port A and B is active in U-Boot and the other two is active when its booted.

//Skuggan

I have one question:
Here: amiganews It
one user said that his memory works at 575 Mhz, but in my sam460ex in Uboot I read that the memory runs at 460 Mhz. I also have 800 Mhz Kingston memory. So why I don't have 575 Mhz?

@Skuggan

Quote:

The sata 3114 has 4 sata ports. Port A and B is active in U-Boot and the other two is active when its booted.

Yes confusions departed when I got that sorted, everything boots in the prescribed order. A different PSU supplies four good sata feeds and is much quieter. I recommend cases without PSU so one can select ones own - unless a good one is in the box already of course.

A 4650 graphics card is on its way but most suppliers give us the thumbs down on the 4000 series - they have been replaced by the 5000 series etc and what about the 6000 series . . . ? How long does a series remain in the market?

This is being written from the SAM460. For some reason I can't do copy and paste from the keyboard (yet).

Noel

sam460ex + 2gb ddr2-800 +1 gb radeon powercolor 4650 ddr3 dvi out

http://www.youtube.com/watch?v=Zh1JTmD_DUM&feature=player_embedded

dvi though not a full-performance work, some small lines appear on the screen ..
No problems with the vga





this card

http://www.exa.com.tr/powercolor/ekran_kartlari_kategorisinde/powercolor_hd4650-334-10799.html

Last edited by jacknife on 02-Mar-2011 at 10:14 PM.
Last edited by jacknife on 02-Mar-2011 at 10:10 PM.

_________________
Sam 460EX / 1.2 ghz + 2gb DDR2-800 +1 TB sata2 + 1gb radeon 6570 lp+ Sil3512 + AmigaOS 4.1 FE u1 +Envy24HT PCIe audio card+23 hp Led monitör (1920x1080 ) dvi

@hans

A bit offtopic, but did any of radeonhd drivers support compositing for now ? While its not so important as 3d, still, fancy enough and make feels of OS a bit more complete with it. As i see on your site, many of cards not have compositing working for now, but just to be sure: maybe some of them already have it ? And if none of them, what the main problem with it ? (interesting in technical details about)

Last edited by kas1e on 02-Mar-2011 at 11:11 PM.

_________________
Join us to improve dopus5!
zerohero's mirror of os4/os3 crosscompiler suites

@kas1e

Afaik the radeon x1000 series has hw composition.

_________________
I'm an antique. Don't light my fuse

@kas1e

Quote:

kas1e wrote: @hans A bit offtopic, but did any of radeonhd drivers support compositing for now ? While its not so important and 3d, still, fancy enough and make feels of OS a bit more complete with it. As i see on your site, many of cards not have compositing working for now, but just to be sure: maybe some of them already have it ? And if none of them, what the main problem with it ? (interesting in technical details about)

As Antique said, the Radeon X1000 series of cards have fully working compositing. I'm in the process of implementing compositing for Radeon HD cards at the moment. There are no problems aside from compositing being quite a bit more complicated than the other HW acceleration functions.

Hans

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.

@jacknife

Quote:

jacknife wrote: sam460ex + 2gb ddr2-800 +1 gb radeon powercolor 4650 ddr3 dvi out http://www.youtube.com/watch?v=Zh1JTmD_DUM&feature=player_embedded dvi though not a full-performance work, some small lines appear on the screen .. No problems with the vga

DVI output happens to work at some resolutions on some cards. For example, it just happens to work at 1920x1080 on my Radeon HD 4650, but not at low resolutions (e.g., I can't see the boot picture). This is really a matter of luck; the DVI output configuration registers just happen to be set up correctly when the output is enabled. However, other cards happen to not be set up correctly for the desired resolution, and so this is officially not supported, yet. DVI output for the newer cards will come.

Hans

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.

@Hans



os4.1 re-installed everything just fine dvi problem resolved now ..


now, no problem...



* I can not see the boot image
not a problem for me

Last edited by jacknife on 03-Mar-2011 at 12:07 AM.
Last edited by jacknife on 03-Mar-2011 at 12:00 AM.

_________________
Sam 460EX / 1.2 ghz + 2gb DDR2-800 +1 TB sata2 + 1gb radeon 6570 lp+ Sil3512 + AmigaOS 4.1 FE u1 +Envy24HT PCIe audio card+23 hp Led monitör (1920x1080 ) dvi

@T-J

http://www.youtube.com/watch?v=A3JbzW3l-NE

_________________
http://www.hostcove.com
http://www.youtube.com/hostcove
Sam460 : X1000 : X5000

@logicalheart

Nice!


I see some taskbar (it shows runinng applications) on the bottom of your screen. What app do you use for such purpose?

@Hans

Very happy to say I'm now the proud owner of a SAM 460... I could only afford the board this month but got it jury rigged from borrowed parts from my PC last night enough to boot it up. Used a very cheap SII 4113 SATA contoller in the PCI slot to get multiple SATA ports working. All in worked very smoothly.

I've got an old PCI-X Radeon X300 (don't know if these are supposed to work or not...) that work were throwing out, I plugged that into the PCI-X slot but my monitor simply reported no signal. I couldn't get Scout on it to look at the bus but it was as though the board didn't see the card at all.

Onboard video worked fine though.

_________________
A600 OS3.1 ACA620 | '030 A1200 OS3.5 | µA1-C 750GX OS4.1 | SAM460 OS4.1 | '040 A3000 OS2.1 | Christian Aid |

@Jamie_S

Quote:

Jamie_S wrote: @Hans Very happy to say I'm now the proud owner of a SAM 460... ...

Congratulations.

Quote:

I've got an old PCI-X Radeon X300 (don't know if these are supposed to work or not...) that work were throwing out, I plugged that into the PCI-X slot but my monitor simply reported no signal. I couldn't get Scout on it to look at the bus but it was as though the board didn't see the card at all.

The atiradeon driver may have partial support for such cards, but I'm not sure. The Radeon HD driver definitely doesn't support those older cards.

It's a little bit suspicious that you cannot see the card. Try Ranger, it is able to list PCI cards, and it should appear in the list. If it doesn't, then something is wrong at a hardware level.

Hans

P.S. PCI-Express is abbreviated to PCI-E (or PCIe) because PCI-X is yet another standard (not used much, AFAIK)

_________________
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
https://keasigmadelta.com/ - More of my work.