"dual boot AmigaOS 4.1 and MorphOS 3.10 on an AmigaOne X5000"

It would be cool to be able to run AOS on core1 and MorphOS on core2.
I wonder if anyone has studied what kind of virtualization work is needed?

Then it would be cool to be able to use some kind of "screamernet" between those two.
(PowerUPNG to use AOS as CPU node, WarpUPNG to use MorphOS as CPU node)

Yes . I go away.

Last edited by KimmoK on 26-Mar-2018 at 12:45 PM.

_________________
- KimmoK
// For freedom, for honor, for AMIGA
//
// Thing that I should find more time for: CC64 - 64bit Community Computer?

@Trixie

Quote:

Trixie wrote: So complaining that a team of volunteers cannot trump a commercial product is like criticising a hospital clown for not being a circus.

MorphOS is a commercial product as well. And I don't think it's a matter of "can not". Look at amount of GPU's they supports already. They can! (maybe more than anyone else in the Amiga market) They are building support from the ground up and cover everything in the process, that's all!

Barts should be followed by Cayman, right? Then comes Cape Verde (like: 7750, 7770), Pitcairn, and Tahiti, etc. And then..., and then...

@Spectre660

I have been looking at a PCI 9250 as i notice this is supported under MorphOS, so great that this works with Linux too.

Are there any issues that I may need to be aware of here in terms of my existing set up??

Other ports on my X5000 are occupied as follows:
PCI-E x16 slot taken by Radeon HD7750
one PCI-E x1 slot is taken up by my Envy 24HT sound card
one PCI-E x1 slot is taken up by the network driver
one PCI slot is taken my SIL3512 Sata controller.

_________________
Amigaone X5000/20 4GB Radeon RX 550 Polaris 12 AmigaOS4.1 Final Edition Update 1
Amiga 1200 Workbench 3.1.4
Amiga CD32

Mmm i was in hope for a new version of OWB ... but according to the changelog it's the same old 1.24 version + some internal fixes from the latest AROS version

BTW the list of change in MOS 3.10 is impressive

_________________
BACK FOR THE FUTURE

http://www.betatesting.it/backforthefuture

Sam440ep Flex 800 Mhz 1 GB Ram + AmigaOS 4.1 Update 6
AmigaOne XE G3 800 Mhz - 640 MB Ram - Radeon 9200 SE + AmigaOS 4.1 Update 6

@outrun1978

The PCI 9250 option is NOT working for MorphOS .


Quote:

outrun1978 wrote: @Spectre660 I have been looking at a PCI 9250 as i notice this is supported under MorphOS, so great that this works with Linux too. Are there any issues that I may need to be aware of here in terms of my existing set up?? Other ports on my X5000 are occupied as follows: PCI-E x16 slot taken by Radeon HD7750 one PCI-E x1 slot is taken up by my Envy 24HT sound card one PCI-E x1 slot is taken up by the network driver one PCI slot is taken my SIL3512 Sata controller.

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

@Spectre660

Cheers Julian for letting me know , I guess the search goes on for that elusive combination!!

_________________
Amigaone X5000/20 4GB Radeon RX 550 Polaris 12 AmigaOS4.1 Final Edition Update 1
Amiga 1200 Workbench 3.1.4
Amiga CD32

@Spectre660

One option is perhaps to get a gfx card that's supported by both MorphOS and OS4 (and Linux). What was used in the original Sam460 and X1000 deliverances? 4000-card? 5000-card? Those are supported by OS4 natively, right (even though not by a-eon's third party add-on product)?

I'd go for a 4000-card that OS4 supports. They have hardware overlay too, which is far more usable than 3D in our everyday usage scenario. It's not like this is a 3D gaming platform (or a gaming platform -at all-), and the general CPU/performance of even the most powerful PPC machines is still on a 2005 level anyway, so 4000-cards from 2008/2009 is not a bad match IMHO.

Hi

I have 2 PPC macbooks but was wondering as AmigaOS 4.1 runs on Winuae is there a emulator that can run Morphos. ?

_________________
A1200 ACA1232 128MB Indivison MkIICr
Elbox empty Power Tower
RPi3 Emulating C64 ZX Atari PS BBC
Wii with Amiga emulation
Vampire v4 SA

@TRIPOS

The big compromise is giving up 3D under AmigaOS 4.1 with RadeonHD 7000 series cards .
We have waited quite a while and some interesting games are showing up .
At this point is would seem that there would be a better experience in using second machine for MorphOS . Having multiple machines performing at their best is going to be more satisfying.

Quote:

TRIPOS wrote: @Spectre660 One option is perhaps to get a gfx card that's supported by both MorphOS and OS4 (and Linux). What was used in the original Sam460 and X1000 deliverances? 4000-card? 5000-card? Those are supported by OS4 natively, right (even though not by a-eon's third party add-on product)? I'd go for a 4000-card that OS4 supports. They have hardware overlay too, which is far more usable than 3D in our everyday usage scenario. It's not like this is a 3D gaming platform (or a gaming platform -at all-), and the general CPU/performance of even the most powerful PPC machines is still on a 2005 level anyway, so 4000-cards from 2008/2009 is not a bad match IMHO.

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

Well done!

@samo79

Listen I have updated morph os but OWB 1.24 which is said to be more or less updated but if I open a webpage goes into a crisis charge full but it stops everything and I have to restart
if I use the version I have in a separate folder it works as usual
I have updated but the version I had I did not install from scratch !!

Congratulations to all involved with this release, and thanks for sharing the news.

@samo79

The changes in Odyssey are not that small. The/a memory leak has been closed and some other fix allows to log in where it wasn't possible before.

And yes, one can dream of more, but everyday value of this Odyssey has increased quite a bit (I was reylly annoyed about some pages where I was not able to log in and am able now).

_________________
My programs: via.bckrs.de
MorphOS user since V0.4 (2001)

@g01df1sh

Quote:

g01df1sh wrote: Hi I have 2 PPC macbooks but was wondering as AmigaOS 4.1 runs on Winuae is there a emulator that can run Morphos. ?

The WinUAE approach does not work with MorphOS.

_________________
My programs: via.bckrs.de
MorphOS user since V0.4 (2001)

@Zylesea

I do not load the new version pages and I plant I have to reboot the system I do not understand with the old works well

@Zylesea

Quote:

The changes in Odyssey are not that small.

I know, but rumors said about a new version, so i've expected a sort of 1.26 that include a new fixed core for PPC atleast ... but in reality what we have now is merely the old 1.24 plus the merge of the memory leaks's fix from deadwood, so while it's of course good for MorphOS users to have them, sadly it add nothing for us (OS4 users) that we didn't have already :-/

Last edited by samo79 on 26-Mar-2018 at 10:02 PM.

_________________
BACK FOR THE FUTURE

http://www.betatesting.it/backforthefuture

Sam440ep Flex 800 Mhz 1 GB Ram + AmigaOS 4.1 Update 6
AmigaOne XE G3 800 Mhz - 640 MB Ram - Radeon 9200 SE + AmigaOS 4.1 Update 6

@cip060

Have you tried to launch Odyssey when booted off the iso? If in that case something goes wrong then something seems really to be broken, if it's okay there's something wrong with your installation.

_________________
My programs: via.bckrs.de
MorphOS user since V0.4 (2001)

@TRIPOS

Quote:

What was used in the original Sam460 and X1000 deliverances? 4000-card? 5000-card? Those are supported by OS4 natively, right (even though not by a-eon's third party add-on product)?

Actually OS4 does not support any RadeonHD natively. The RadeonHD driver is fully owned by A-EON Technology and is not a part of OS4. If a user wants to use any Radeon card with OS4 they are using a “third party” driver.

_________________
Amiga Kit Amiga Store
Links: www.amigakit.com | New Products | A600GS

@samo79

Quote:

samo79 wrote: @Zylesea Quote: The changes in Odyssey are not that small. I know, but rumors said about a new version, so i've expected a sort of 1.26 that include a new fixed core for PPC atleast ... but in reality what we have now is merely the old 1.24 plus the merge of the memory leaks's fix from deadwood, so while it's of course good for MorphOS users to have them, sadly it add nothing for us (OS4 users) that we didn't have already :-/

I also heard some of these rumours, but since a while it was rather clear that this release will come with a fixed 1.24 instead of a new version.
The good thing is:now with MorphOS 3.10 finally rolled out we'll see a quicker update pace. Maybe this wil benefit Odyssey development, too.

_________________
My programs: via.bckrs.de
MorphOS user since V0.4 (2001)

@Zylesea
The old version that was in a separate folder works without problems apart from the usual problems of youtube that makes me see the videos in jerky
I made an update over 3.9 via ISO and boot-image copied to a USB stick and started with original firmware
my reader of the macmini does not read the discs very well