> to see if there is any interest in it

is that enough ?

_________________
Philippe 'Elwood' Ferrucci
Sam460 1.10 Ghz
AmigaOS 4 betatester
Amiga Translator Organisation

@zerohero:
Quote:

Might be that a version from pre 19 68k might work, or older perhaps, but I have only tested with my own pre 21 config, that made it go into an endless loop.

Okay; my config file is from 4.17pre20 68k. But it doesn't seem to even try to read it, but just comes up with the default config. Has the path for the config file(s) changed? I believe mine is in S: (and the classes definition seems to be in the Modules subdir of PROGDIR: -- for the 68k installation, so no wonder that one isn't seen from the new version . Hmm, maybe that is why the config isn't used, too? I'll try copying the .CLA file over).

Best regards,

Niels

@myself:
Quote:

Has the path for the config file(s) changed? I believe mine is in S: (and the classes definition seems to be in the Modules subdir of PROGDIR:

Okay, I worked this out by myself by checking where the file requesters open when I select Configure->Open and Classes->Open from within the filetypes configuration page.

So I copied my old .CFG to PROGDIR:S and my old .CLA to PROGDIR:Modules, and yes, then I also get an endless loop.

Does anybody know of any tool or documentation for investigating the contents of those files?

Best regards,

Niels

Yeeea! F R E S H news! Works nicely here!

_________________
AOS4 Betatester, Peg2, G4@1ghz, Radeon 9250 256mb, 1gb RAM.

http://www.asciiarena.com
http://www.uprough.net

if you have somewhere a catalog 4.16 related, delete it. Its not compatible.

_________________

My contribution paid!!

Great news
Thanks zerohero.

_________________
---------
AmigaClyde

µA1-C 750GX@800 using OS4.1

@kas1e

Sorry no, no 68k compiles from me. I've made the sources very AmigaOS 4:ish, and removed a whole lot of ancient stuff so far. Current sources probably wouldn't compile very easily on any other plattform.

Knowing the source somewhat now, I could probably manage to compile the old sources for 68k, but there's no point in doing so, for me, and I don't think I can justify the time spent doing so.

Regards,
Joachim Birging

Last edited by zerohero on 23-Apr-2006 at 08:38 PM.

_________________
Common sense - So rare it's almost like a super power

it is a very good idea though, selecting files with the cursors, entering dirs/selecting files with enter, and switching lister with tab. please consider it.

do you have any plans on enhancing dopus4? if so, can you tell us a little of the ideas you have? it would be nice to have a constructive disussion on the topic, i am sure there are lots of good ideas for dopus4 out there.

Last edited by spotUP on 23-Apr-2006 at 11:32 PM.

_________________
AOS4 Betatester, Peg2, G4@1ghz, Radeon 9250 256mb, 1gb RAM.

http://www.asciiarena.com
http://www.uprough.net

Is it possible to pay from an bank-account straight within Europe as I think it would spurr up my buyings a lot (generally a1) , I will never "buy" a visa card just for a few euros + expences. Sorry, the same whining again. I just think we are a little behind in technology as I have the money but want to spend it in the sw/hw but not to the banks who don't care about Amiga at all...
The future should be today.

I installed all the libs etc needed from zerohero page.
copied over my old 68k version. Rebooted.
Tryed the new os4 native version but i cant get the
config window to appear. It wont show up.

I use pre20 68k version before. With the native i got
problems also with colours. The grey background and
the dirs are in white now so it looks strange.
With other words i cant see the dirs as they are in
white colour. Ill test later some more. However as
i cant get the config window to appear i cant change
the colours :(

EDIT: I loaded the config module manually and then
the config window appeared :) My config does open
but many stuff looks or doesnt work good. So
probably not compatible with config of pre20 dopus.

Last edited by Kicko on 25-Apr-2006 at 12:56 AM.

There's a new version available now, some more fixes and stuff. ConfigOpus should be stable now.

http://www.zerohero.se/

Regards,
Joachim Birging

_________________
Common sense - So rare it's almost like a super power

Thanks a lot, I'll try it right now!! Keep the good work.

Saluditos,

Ferrán.

_________________
Amiga user since 1988
AOS4 Betatester
Member of ATO Spain
A1 Cfg
OS4 SCR
A1200

Keep up the good work!

_________________
/Harry

[SOLD] µA1-C - 750GX 800MHz - 512MB - Antec Aria case

Avatar by HNL_DK!

The good news are: it works

The bad news: it doesn't read previous config or classes files. As NBache has done, I have tried to put those files in the correct place, but this has not worked. Loading without .CFG or .CLA and trying to import them from ConfigOpus didn't work either.

When importing filetypes, at least it seems to work: you select the file, the filetypes you want to import and then press OK, but the filetypes are not shown on the list. Strangely enough, if you save the Classes file, the filetypes seem to be there, in the saved file...

On the other hand, importing prefs do not work at all: as soon as you select the .CFG file to be imported, pointer changes to 'busy' and remains that way until you reboot.

Saluditos,

Ferrán.

_________________
Amiga user since 1988
AOS4 Betatester
Member of ATO Spain
A1 Cfg
OS4 SCR
A1200

@zerohero

Just earnt yourself another 10 Euro. Thanks again for your hard work.

loading old config works fine for me with new version!

_________________
0 % Amiga.
www.amigabounty.net

Yes, there are plenty of other things fixed in current version as well.

To those of you that has donated to this project, big thanks from me.

Regards,
Joachim Birging

_________________
Common sense - So rare it's almost like a super power

@zerohero

Btw I can't add filetypes. The class window is empty. Is this a known bug?

_________________
/Harry

[SOLD] µA1-C - 750GX 800MHz - 512MB - Antec Aria case

Avatar by HNL_DK!

Quote:

Poster: freaks Date: 22-Apr-2006 23:00:21 ... old post below ====================== i keep getting error message: "Can't get IDOpus interface" a quick look at snoopdos showed me this: 44 ramlib Open LIBS:dopus.l.main Read Fail 45 ramlib Open LIBS:dopus.l.main Read Fail 46 ramlib Open CLASSES:dopus.l.main Read Fail 47 ramlib Open CLASSES:dopus.l.main Read Fail 48 ramlib Open RAM Disk:DOpus4-os4/dopus.l.main Read Fail 49 ramlib Open RAM Disk:DOpus4-os4/dopus.l.main Read Fail 50 ramlib Open RAM Disk:DOpus4-os4/libs/dopus.l.main Read Fail 51 ramlib Open RAM Disk:DOpus4-os4/libs/dopus.l.main Read Fail 52 ramlib Open RAM Disk:DOpus4-os4/classes/dopus.l.main Read Fail 53 ramlib Open RAM Disk:DOpus4-os4/classes/dopus.l.main Read Fail i copied everything from the dopus archive in place, and installed xfdmaster.library and xfdmaster.l.main any advice? tnx

I'm getting the same error message with the same results in SnoopDos. As anyone found a solution for this?

_________________
--
-=#Val#=-
Valiant@Camelot


Amiga 1000; Amiga 2000; Amiga 3000T; CD-TV; CD32;
AmigaOne-XE 800Mhz G4;Sam400ep 666Mhz;
AmigaOne X-1000 1.8Ghz PA6T-1682M