Unfortunately, MPlayer-GUI doesn't support LiveForIT-Mplayer (AREXX commands) sot it is useless with this version of MPLayer.

_________________
PowerMac G5 2,7Ghz - 2GB - Radeon 9650 - MorphOS 3.14
AmigaONE X1000, 2GB, Sapphire Radeon HD 7700
FPGA Replay + DB 68060 at 85Mhz

Very beautiful the new banner in this release of MPlayer-GUI

@K-L

I believe LFI's mplayer was updated with functional arexx commands. Although I don't use the control panel myself, easier with the key controls directly in mplayer, so it doesn't make it useless, you still get rid of typing shell commands.

_________________
- Don't get fooled by my avatar, I'm not like that (anymore, mostly... maybe only sometimes)
> Amiga Classic and OS4 developer for OnyxSoft.

@Deniil715

Well, you can only see one video since when closing a video, it doesn't ungray the START button. You have to tell Mplayer-GUI that LFI'Mplayer has crashed but it doesn't free up memory usage.

_________________
PowerMac G5 2,7Ghz - 2GB - Radeon 9650 - MorphOS 3.14
AmigaONE X1000, 2GB, Sapphire Radeon HD 7700
FPGA Replay + DB 68060 at 85Mhz

@K-L

If i remember correctly the ARexx "part" was finished and functional, bur if not you can help him reporting your bugs/request here:

https://code.google.com/p/mplayer-amigaos/issues/list

_________________
BACK FOR THE FUTURE

http://www.betatesting.it/backforthefuture

Sam440ep Flex 800 Mhz 1 GB Ram + AmigaOS 4.1 Update 6
AmigaOne XE G3 800 Mhz - 640 MB Ram - Radeon 9200 SE + AmigaOS 4.1 Update 6

@K-L

What version are you using and what video driver are you using? I have not seen this behaviour since I was using the sdl driver with some old mplayer.

Does it behave the same in the shell? If not, what switches have you enabled in the GUI? Select "Print command line" from the menu to see what extra parameters you give it tat you don't use in the shell, if it works in the shell without hanging on exit.

_________________
- Don't get fooled by my avatar, I'm not like that (anymore, mostly... maybe only sometimes)
> Amiga Classic and OS4 developer for OnyxSoft.

@ K-L

thanks!

_________________
____________________________
c64-2sids, A1000, A1200T-060@50(finally working!),A4000-CSMKIII
! My Master Miggies- Amiga 1000 & AmigaOne X1000 !
mancave-ramblings
X1000 I BELIEVE

Thanks for the updates.

BackUp sounds like just the program I need to backup my sam440ep to a FAT formatted USB disk now USB2 seems to be stable on my sam.

In the past I always just made manual backups to another fixed disk inside my sam440ep with DOPUS4 but this has 2 downsides. First I can only recover files with another OS4 computer (not good if I have a hardware failure) and secondly links were not preserved, so the backup required more space than the original and included duplicate OS files.

_________________
Sam440ep 667mhz, 512MB, 120GB 2.5" HD, OS4.1FE
WinUae 3.0.0, OS 3.9, BB3, Catweasel MkIV
Amiga 1200, Blizzard 040/40 (BlizzardPPC 060/200 with SCSI removed at present), mediatorSX pci, Voodoo3, PCI network card os 3.9BB2
4MB Minimig with ARM addon boar

@Dwyloc

Even though BackUp now can do incremental backups correctly onto FAT devices, I still recommend backing up Workbench (i.e. SYS:) and the SDK (which has a lot of links) to something that has an Amiga file system to make sure all protection bits, comments and links are preserved correctly. FAT cannot store all the Amiga attributes.

Besides, you have little use for the system without an Amiga to run it on

Better to backup data files, like music, pictures, programming etc. which makes sense to read without an Amiga onto FAT.

_________________
- Don't get fooled by my avatar, I'm not like that (anymore, mostly... maybe only sometimes)
> Amiga Classic and OS4 developer for OnyxSoft.