Wonderfull! Would be possible to move my licence from the macmini to the Sam and how the dual boot works?

Gratulation to everyone involved

Now you can run MorphOS on new hardware

IIRC, you must prove your hardware is broken to get a valid keyfile.

_________________
PowerMac G4 MDD 1.25 Dual MorphOS 3,5 Demo (for a while) Amiga 1200 030 AGA Pegasos 2 G4 (wrecked)

@ilbarbax

Just remember that MacMini G4 >1.25 GHz with updated overlay handling in 3.8 allows to watch most of 720p movies without framedrops.

Last edited by rzookol on 15-May-2015 at 11:51 AM.

Interesting:
"Miscellaneous improvements to support the PPC440 family of CPUs"

Great news!
Where can we find the list of supported gfx?

Last edited by kyle on 15-May-2015 at 11:56 AM.

@ Kyle

morphos-team.net/hardware

@ilbarbax

There is no such a thing as moving licence. Anyway registering MorphOS on Sam costs only 49 euros.

Congratulations MorphOS team .
Will give it a try this weekend .

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

Nice news!
Also more sales for ACube I hope!

@OlafS25

>"Miscellaneous improvements to support the PPC440 family of CPUs"

Perhaps it's because PPC460 has 440 core inside. IIRC.

_________________
- KimmoK
// For freedom, for honor, for AMIGA
//
// Thing that I should find more time for: CC64 - 64bit Community Computer?

@OlafS25

Interesting, a port to Sam440 would be awesome !

_________________
BACK FOR THE FUTURE

http://www.betatesting.it/backforthefuture

Sam440ep Flex 800 Mhz 1 GB Ram + AmigaOS 4.1 Update 6
AmigaOne XE G3 800 Mhz - 640 MB Ram - Radeon 9200 SE + AmigaOS 4.1 Update 6

Grrrrr......Now I'm wishing I had a 460.

_________________
Tinkering with computers.

Hi

Just tried MOS 3.8 on Sam460 + Radeon R7 265.

Unfortunately since R7 265 (Pitcairn RadeonHD 7800) is not supported it stops after loading Uboot "Could not find any valid modes."

Edit: I also tried booting from on board SM-502, it also didn't work...Same message from UBoot althogh I chose "boot from on on board graphics card"

I hope that MOS 3.9 support R7/R9 series...

Last edited by SinanG on 15-May-2015 at 02:19 PM.
Last edited by SinanG on 15-May-2015 at 01:58 PM.

_________________
AmigaOS4 Beta-Tester
----------------------------------
Amiga X5000 8GB Radeon RX 560
Amiga A1222 2GB Radeon RX 550
Sam 460 2GB RadeonRX 550

You did not even load the boot.img.

From what I see you failed inside UBoot selecting the right files/options.

I guess you tried booting from SD card. Use a CD for installation/testing. It is recommended,

The CD/SD Card however will be fully operational. No need to install anything for testing.

Make sure you follow the installation/boot instructions mentioned here:

http://morphos.de/installation

It is not MorphOS´s fault when you fail booting :)

Last edited by geit on 15-May-2015 at 02:26 PM.
Last edited by geit on 15-May-2015 at 02:23 PM.

@geit

I tried booting from CD...

_________________
AmigaOS4 Beta-Tester
----------------------------------
Amiga X5000 8GB Radeon RX 560
Amiga A1222 2GB Radeon RX 550
Sam 460 2GB RadeonRX 550

Well done!

Quote:

•Added support for the X1000 series of Radeon graphics cards.

Quote:

•added framebuffer only (no hardware 2D/3D acceleration) support for some HD2xxx/HD3xxx/HD4xxx/HD5xxx/HD6xxx series Radeon graphics cards

So I was right when I wrote GFX support will be problem.

@SinanG

Regarding your comment on MorphZone you really tried booting a non supported card.

In that case you can replace it with a supported one or remove it to boot MorphOS using the build in gfx component.

@pavlor 

At least we supported the most basic cards so far and not force the user to swap cards like it was needed on Pegasos2. Also these drivers may get improved in the future and the update will be free.

In fact the drivers you have on disc are free to use and available for testing, while Pegasos2 owner were force to swap cards as OS4 did not work at all with several cards. And they had to pay for this experience.

I think the MorphOS Team did a good job in not delaying the release any further. Most systems will boot MorphOS without any hardware change.

In my personal opinion applications which need those hi-end cards are near to non existing on our systems. I can only speak for MorphOS and there RTCW is still the game with the most hardware requirements, but it runs quite nice, even on old 9600 cards.

Last edited by geit on 15-May-2015 at 03:08 PM.

@ SinanG

Seems that you need to remove any non compatible graphics cards for it to boot from the onboard graphics.
So no HD6670, Hd7750 or R7 cards

_________________
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card

/me bows for the masters which once again release a magnificent piece of work!

Thanx for the update guys

_________________
The only spanish amiga news web page/club: CUAZ