I have the chip too but I wait until the new driver is uploaded to os4depot or a newer UBoot.
Thanks Steve and Davy.
Lio

I have the one whit the missing chip

_________________
http://lifeofliveforit.blogspot.no/
Facebook::LiveForIt Software for AmigaOS

Quote:

About soldering this chip onto boards that don't have it! C'mon people get serious. Would you solder a chip onto a pc board that doesn't have sound?

Don't tell me what to or not to do to my own board. :p

I did the DMA fix on my board even though I already had a SiI0680 card. I did the USB fix even though I don't use USB.

Why should I not add the Sigmatel chip even though I have an MAudio card that would blow it away? Considering how unusual it is to have speakers connected to my XE I wouldn't likely notice if I found a better use for the MAudio card...



Actually, speaking of the DMA fix... Any chance this ACPI thing would make DMA work on unfixed XE boards, or somehow interfere with boards that already have the DMA mod done? Just curious if Eyetech's comments that it's some unknown software thing causing the DMA problem amd not hardware flaw are close to being proven correct... Could other previously unused ACPI registers be responsible for the DMA situation?

_________________
All glory to the Hypnotoad!

@Thread

Thanks to the various photo's, I have identified that I also have the chip.

Not being electronically competant, or is that confidant, I'll wait for the updated driver, and some one to outline the required steps to get this working.
Both with the AHI prefs settings and connecting to the onboard sound chip with a CD drive.

It would be cool to get PlayCD working through this to test it.

_________________
Peter Swallow.
A1XEG3-800 [IBM 750FX PowerPC], running OS4.1FE, using ac97 onboard sound.

"There are 10 types of people in the world: those who understand binary, and those who don't."

@Geri

Quote:

(atleast they should have the same features; I didn't compare the pin I/O, but the package is the same)

Every one I looked at, even back to the 2.1 specs, had basically the same pinout (newer rev AC97 chips have some "reserved" pins in the older specs doing things now), and all the internal register layouts were the same.

Will have to see what the chips support based on DaveAE's response above.

Just did some digging in the AD1981B data sheet. It does support variable rate like he mentioned, so it should work. I'll have to double-check the pinouts later, but they should still match up and work.

Last edited by DWolfman on 26-Oct-2005 at 06:03 PM.

_________________
This posting, in it's entirety, is the opinion and/or statement of the author and does not reflect the views and/or position of this site.

@DaveAE

Great work!
My A1XE has the AC97 chip!

But no sound... will wait until new driver is uploaded.
Now I can get rid of my SB which I bought when I was told onboard sound wouldn't work!

@thread

now let's hope DMA problems can be solved also this way and we do have a perfect computer! (But we already know that!
Perhaps there are other hidden hardware fetures we don't know like a disguised G5

Last edited by mbilla on 26-Oct-2005 at 05:31 PM.

_________________
A computerworld without MS products and Windows!
Connect your Amigas ...
...The Red ONE-A1XE G4 - A3000T- A3000 - A4000 - A2500- A1000 - A600 - CDTV - CD32...
and your PDAs and laptops ...
Psion 5mx Pro - Psion NetBook - Apple iPhone - MacBook Pro

@ Stephen Brookes and all the other great AmigaOS4 developers

The Good news:
AC '97 Rev 2.1 Codec with Sample Rate Conversion
RS Stock no: 2508262565
National Semiconductor
Manufacturer's part number LM4549VH

£4.03 + VAT each.


The bad news:

RS only sell them in packs of 250 so that will be 1,007.67 + Vat

Don't think I'll bother

@MikeB

My sentiments exactly!

I did neglect to say that before, didn't I?

Say, how did you get that smiley with the thumbs up? It's not listed in the emoticons page.

So I'll just use this instead, for everyone involved in figuring this out:

_________________
This posting, in it's entirety, is the opinion and/or statement of the author and does not reflect the views and/or position of this site.

@DWolfman

Quote:

Say, how did you get that smiley with the thumbs up?

Easy when you know how

Hey all,

Whooop.....there it is! I have the Sigmatell chip also. This is quite interesting news!

Wasn't there a batch of XE Eyetech never sold? Maybe time to rethink that( depending on the problem). Maybe also time to start thinking about a new production run.

Also, it look like Amiga Center in France may have some new business......... Soldering on AC97 codecs.

Things are looking up.

_________________
AmigaOne-XE G3 OS 4.
A4000 PPC
A1200 PPC

@billt

Quote:

Any chance this ACPI thing would make DMA work on unfixed XE boards, or somehow interfere with boards that already have the DMA mod done? Just curious if Eyetech's comments that it's some unknown software thing causing the DMA problem amd not hardware flaw are close to being proven correct... Could other previously unused ACPI registers be responsible for the DMA situation?

I was thinking the same thing.

Could the DMA problem be sorted now progress with the VIA has been made. what happens to the boards which have had the work around applied would the corrent initialisation cause problems on those boards.

To DAVEAE et al great work fellars. As soon as i get round to testing it. I'll paypal you the driver subs.

At Eyetech... You were right all along !!!!

_________________
A1200T 603e 330Mhz - Mediator TX OS4.1 F.E.
CDTV 8MB Fast, OS3.1, SCSI, MicroSD SCSI & CD32 FMV
X5000, X1000, A1XE with OS4.1F.E.

Got it! This is great news! Nice work lads.

/shoe

Thanks for the great Job!! :)

i have A1-xe and i get driver correctly installed, and ahi prefs shows modes..
i can't get any test sound but, im too lazy open my tower, to check cables..
and rewired... to motherboard cd-rom input.. :)

But really BIG Thanks For GREAT JOB!!

_________________
Amiga4ever

I can't play a test sound either.

Good Evening,

I've got the Sigmatel chip, even though I got an XE a year or so after they were first shipped. The Phantom is one happy Interrogative! (Perhaps I should have punctuated that sentence with an "?") This is very good news for those like me who have been considering what sound card to buy. We don't need to buy an extra gizmo! Yeah, verily, yeah! Huzzah! [Insert ecstatic phrase here]!

-The Phantom "?"

_________________
I sold my SAM460ex lite... waiting for money to buy a Raspberry Pi... or a Classic A1000 with Buffee... or an A1222... and OS4.3 FE update 11

If the chip designator is U43, then I'm afraid I do not have one :((
Jim Steichen

_________________

@DaveAE

Quote:"If anything, you need to blame VIA, since they didn't want to help out
and their docs are really really badly written."

This statement is worth repeating. (it gets lost in a thread this long).

Best Wishes,
#6

_________________
This posting, in its entirety, represents solely the perspective of the author.
*Secrecy has served us so well*

@Dwolfman
Quote:

Say, how did you get that smiley with the thumbs up? It's not listed in the emoticons page.

He, umm, 'cheated.' Think about a different tag xoops honors...

_________________
Are we not done with the same silly arguments and flames yet??!

This is great news!!
If I can offer a small suggestion:

It was not mentioned in the top article here, nor in the readme
at OS4Depot, that this affects certain versions of the XE Board only.

I'm sure there are many SE and Micro AmigaOne owners who are wondering
how this will affect them.

To be fair, I couldn't find the Sigmatel chip anywhere near my AGP slot
in my Micro board! (O.K., I'm joking here, I know full well that there is
no AGP Slot in my Micro!)

I think it's awesome good news! Way to go!!

Things just keep getting better and better.

LyleHaze

_________________
question=(2b||!(2b))