Quote:

But will there be a new update of the Warp3D drivers released before OS 4 final when/if the problem is solved or will we have to wait for OS 4 final?

I will tell you when I know.

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

Thank You very many! Must back up now and then try the install.
What about Radeon 8500LE. Is it supported?

Quote:

Poster: nzv58l Date: 8-Feb-2006 10:41:09 Dang and I am stuck here at work! Can't wait to try it out. Thanks Hyperion and Beta testers!

Same here.

Hyperion!

_________________
'unfixed' A1XE, 512mb RAM, plug-in USB card, Sil 0680 IDE card, Radeon 9250, built-in sound, OS4.1 update 5.

Strange, i successfully managed to burn a full installable Update 4, and
when booting that CD, i got the same trashed Workbench screen. Couldn't
get up a window from the installer making the choices because i'm also
using the Radeon 9200...

I'm convinced that the Radeon 9200-drivers have to be updated and bugfixed,
no matter that there now are 3D-drivers for it in Update 4

Will have to do more testing over the weekend. I'm busy with other stuffs now..

Sweet!, cheers guys!
Now drink plenty of beer and chill for a while ok?
again!

wizz.

_________________
Rev 1D3 Amiga 1200, Apollo 1240 (40Mhz '040, 64MB RAM), Indivision MKII, Fast ATA MK V, Rapid Road USB, PCMCIA WIFI & OS 3.14

@Helgis

Change UBoot - Amiga Multiboot settings to boot your CD/DVD first
then you'll boot up just fine. This is actually said in the pdf.

_________________
/Harry

[SOLD] µA1-C - 750GX 800MHz - 512MB - Antec Aria case

Avatar by HNL_DK!

@Samwel

Quote:

although IBrowse (all MUI apps?) flickers as hell when resized.

IBrowse flickers as it uses custom drawing by itself, the system cannot influence that. However you should go to MUI Preferences and under 'Windows' have 'Refresh' set to 'smart' and 'Redraw' set to 'without clear'. That will give you the best performance with MUI apps.

Quote:

That will give you the best performance with MUI apps.

Speaking of MUI, did you notice the about screen mentions it has been compiled
with GCC 4.0.2. Looking forward to the new SDK!

_________________
OS4.1 + SAM Flex
RIP my A1XE.. that used to have an appetite for batteries!

The antialiasing has been improved too it seems. My fonts all look a lot better.. I didnt think there was anything to be improved on, but I was wrong.

Anyone noticed all the new screen blankers yet and the unified interface for
them all?!

Cheers,
Bean.

_________________
OS4.1 + SAM Flex
RIP my A1XE.. that used to have an appetite for batteries!

Update PHWOARR!

Quote:

New Extended Input System allows the use [...] of Multimedia keyboards (with keys like volume control, play/pause etc)

How do you configure this? I can't see anything in the docs.

Also, USB joysticks. I see amigainput/generic_usb.driver on the disk, but AmigaInput Prefs makes no attempt to load it (I checked with SnoopDOS ) so it doesn't appear on the list.

Anyway, good work. Nice and fast, and I especially like the new configuration options for P96 screenmodes (never got on with P96Mode - perhaps it could be shifted into Tools now?).

Chris

Last edited by Chris_Y on 08-Feb-2006 at 10:54 PM.

_________________
"Miracles we do at once, the impossible takes a little longer" - AJS on Hyperion
Avatar is Tabitha by Eric W Schwartz

@Stephen_Robinson

Quote:

Can't down load with Dial up, because my Stupid ISP cuts me off after 2 hours.....

Don't blame your ISP, it appears the Hyperion server dumps all connections every 2 hours, and will not resume once disconnected.
It appears a new "pipe/code" is initiated. .

I am on 56K digital link and am dumped just before completion.

Roll on split downloads.

Cheers,
Tim

P.S. For when I DO get it thanks to all involved.

Last edited by T_Power on 09-Feb-2006 at 12:07 AM.

Downloaded and ready install! But that a job for tomorrow evening.
Thank you all who helped with Update 4!

_________________
After a decade away from the scene, I am back!

Quote:

Any news on the updated SDK? what version of gcc, any updates to clib2, new docs, etc?

New SDK is quite high up on the priority list. It will contain gcc 4.0.2 or whatever is out then.

_________________
Seriously, if you want to contact me do not bother sending me a PM here. Write me a mail

Nice one, now all I need is some hardware and I will join the OS4 ranks.

I suppose I should ask, when is OS4 full out?

_________________
Amiga A1200, 3.1 ROMs, Blizzard 1230 MKIV 64MB & FPU, 4GB DoM SSD, Workbench 3.1

@All

I'm back online with a fresh install of Amiga OS 4.0 update #4 and AWeb.

Thanks very much to Rogue and everyone at Hyperion, programmers and beta testers.

@mpiva

Quote:

Any chance you'll be able to get it installed in time to show off at the AmiCUE meeting tomorrow?

I'm up and running on the drive I use for testing, so should be a go for tomorrow night. I'll be using my hard drives in PIO 4 mode until I'm sure my system is stable enough to try UDMA.

Still have to try out AmigaAMP, DvPlayer and my old apps.

Last edited by redfox on 08-Feb-2006 at 11:24 PM.

Quote:

Poster: A1200 Date: 8-Feb-2006 16:07:27 Nice one, now all I need is some hardware and I will join the OS4 ranks. I suppose I should ask, when is OS4 full out?

Q: When is OS4 full out?
A: When the hardware is out!

Q: When is the hardware out?
A: When it's done!



Firbodi

_________________
MicroA1 G3, 512MB RAM, DVD-RW; and A1-SE G3,512MB RAM, CD-RW & DVD-ROM
Avatar: Perspolis, Capital of Achaemenid Empire 500 B.C.

I wanna play too, can I buy a copy for my Blizz 1200 please?

@jahc

I noticed that too. It looks like "cleartype" in windows. Very nice on my TFT!