@murakami

GLQuake can also be used for this purpose. Probably any other that uses minigl/w3d and doesn't have the "problem" will work too. No need to use WarpView if it doesn't work for you...

I have it working!!!

I copied the files from the demo drawer on the PC by accident, now copied the full game and alls fine.
Its seems to run quick here, thanks Thomas

I know wot brotherly rivelry is like so Rogue, Wot can you port to out do him now then?

Last edited by Curty on 08-Jul-2006 at 01:45 PM.

_________________
A1XE G4 800mhz,512mb,Radeon9200,SonyDRU-510A and 800a,ESI Juli@, Sil680, WiFi.

All I get when trying to play the game, or show a demo, is a high pitched sqeeling noise and a total lockup of my XE.

A1-XE @ 800MHz, G4
256 Mb
Radeon 7000
SoundBlaster Live! 5.1
Sii0680

Regards,
Joachim Birging

_________________
Common sense - So rare it's almost like a super power

@salass00

Yes !!! It works ! Thanks for the tip.
But I'm a bit disapointed with the frame rate...

My config is :
AmigaOne-XE G4 933 MHz, 512 Mo memory, Radeon 9200 AGP

Last edited by murakami on 08-Jul-2006 at 05:31 PM.

_________________
Read aMiGa=PoWeR !
--------
Go and subscribe !

Which AmigaOne and gfx card do you have?

_________________
AmigaOne X1000 1,8 Ghz/2 GB Ram + Radeon 6670 2 GB + AmigaOS4.1
A4000T CyberstormPPC 604e-200Mhz/060/128MB+CybervisionPPC 8MB + AmigaOS4
and anymore other Amigas...

Yahooo!
Finally found my quake 3 CD today and got Q3 up and running on the A1..

Absolutely amazing!
Framerate isn't the best and it skips a little, but it's perfectly playable on my voodoo 3 :D

All we need now is an "Amigaworld Q3" server :)

Edit: And online play works good too :D

Last edited by BinoX on 08-Jul-2006 at 05:17 PM.

_________________
Back to action!

Could anyone help me ?.. i cannot start the game.. how i have to edit the q3 file ?..

i have downloaded the demo version of quake 3 arena..

_________________
GDG-Entertainment
OS4Games
Iksnet
Bitplane

Quote:

Is it perhaps possible to compile this with more conservative settings, to reduce RAM requirements?

Source code is available, too ;)

_________________
Thomas, the kernel guy

"I don't have a frigging clue. I'm norwegian" -- Ole-Egil

All opinions expressed are my own and do not necessarily represent those of Hyperion Entertainment

Quote:

WarpView is quite buggy here.

Try another Warp3D program.

_________________
Thomas, the kernel guy

"I don't have a frigging clue. I'm norwegian" -- Ole-Egil

All opinions expressed are my own and do not necessarily represent those of Hyperion Entertainment

Quote:

I'm pretty sure Bigfoot's version doesn't need 512MB RAM..

My machine has only 256 MB, and I can run it, but not some of the bigger mods. Depending on how much stuff you have running in the background, you might run into trouble.

_________________
Thomas, the kernel guy

"I don't have a frigging clue. I'm norwegian" -- Ole-Egil

All opinions expressed are my own and do not necessarily represent those of Hyperion Entertainment

@zerohero

I get this lock up too after a minute or 2 of playing.

It comes across as the same audio lockup we used to have when playing audio online (This thread).

A1-XE G4 @ 800Mhz
512Mb
Radeon 7500
and a Soundblaster Live! 5.1.

It was the SoundBlaster that was causing the problem in the above thread. I wonder if it's the culprit here.

FuZion.

EDIT: Sorted the thread link. So far, it's the SBLive 5.1 users speaking up. Any non-SBLive 5.1 users getting a lock up?

Last edited by FuZion on 09-Jul-2006 at 11:20 PM.

@Fuzion

I get the same lock up problems as well.

AmigaOne XE G4 @800mhz
512MB
Soundblaster Live
Radeon 9250
SII 0680

Last edited by RussellB on 09-Jul-2006 at 03:31 PM.
Last edited by RussellB on 09-Jul-2006 at 03:12 PM.

me too.. same lockups

A1-Xe 933mhz 512ram
radeon7000
sblive 5.1
sii0680

i can play about 3min and system freeze..
and there is high sound coming from my speakers....

_________________
Amiga4ever

i just try TrueCombat mod and it plays very good..
i play it 1.5 hour and there is no any lockups.

but if i play quake3arena it self.. i can only play it 3min.. and my amiga gets jammed!

hmm.. and i get in fullscreen 640*480 -16bit and all detail off/low
only 12fps.

in window i get 35fps. :(

_________________
Amiga4ever

That's to low framerates for a Radeon 7000. Look if you have set "interrupt=yes" in the picasso monitor driver.

_________________
AmigaOne X1000 1,8 Ghz/2 GB Ram + Radeon 6670 2 GB + AmigaOS4.1
A4000T CyberstormPPC 604e-200Mhz/060/128MB+CybervisionPPC 8MB + AmigaOS4
and anymore other Amigas...

@ sloxa

Did you enable interrupts in the Picasso96 monitor ?

_________________
Thomas, the kernel guy

"I don't have a frigging clue. I'm norwegian" -- Ole-Egil

All opinions expressed are my own and do not necessarily represent those of Hyperion Entertainment

OK! thats the problem..
i put interrup=yes and Fps is now 20-55 in 640*480 and all detail high/32bit

thanks....

_________________
Amiga4ever

@ sloxa

Without interrupt-controlled page flipping, the driver has to wait for the vertical retrace, hogging the CPU... that's why it's so slow...

_________________
Thomas, the kernel guy

"I don't have a frigging clue. I'm norwegian" -- Ole-Egil

All opinions expressed are my own and do not necessarily represent those of Hyperion Entertainment

@RussellB
I think that is a minigl problem. Please start quake1 before Quake3.

Last edited by AmigaPapst on 10-Jul-2006 at 08:40 PM.

_________________
AmigaOne X1000 1,8 Ghz/2 GB Ram + Radeon 6670 2 GB + AmigaOS4.1
A4000T CyberstormPPC 604e-200Mhz/060/128MB+CybervisionPPC 8MB + AmigaOS4
and anymore other Amigas...

On my systerm (A1SE 512MB Radeon9250) I got some randomly locks up however the game was rather playable...
The only thing that i got that was really noisy was that my usb mice will stop work after few minutes of play and than i must use a ps2 mouse...
Not really good thing...

However...

GOOD WORK!

Tuxedo.

Last edited by Tuxedo on 10-Jul-2006 at 10:38 PM.

_________________
Simone"Tuxedo"Monsignori, Perugia, ITALY.